I am installing the main mounting bracket and the lower crank pulley. Can I check the alignment now with a straight edge or do I have to wait till the belt is on? If now, do I align the outer face of the pulleys? Can I put washers under the mounting plate if needed? Looks like the lower pulley sticks out about 3/16" further than the small pulleys on the plate.

Thanks!

 

Align the crank pulley with the compressor pulley first.

 

just mount up the bracket. get a straight edge. and see how much space needs to be added to each pulley. i had to add bout 1/4 inch to all the bolts. they were all even then. i havent had any problems with the belt.

-steve