how te remove lightning lower intake manifold 01
Thread Starter
|
Senior Member
Joined: Feb 2012
Posts: 113
Likes: 0
how te remove lightning lower intake manifold 01
i removed the upper plenum tried to remove supercharger but those bolts were just to tight. so then i just decide to remove lower intake to get it out completely i don't know if i got all of those intake bolts out i have 9 now not sure if their is 10 or maybe i just missed it or is their something else preventing the lower intake to snap out? do i have to remove all my coils with spark plugs or is their a bolt somewhere i'm leaving out?
Thread Starter
|
Senior Member
Joined: Feb 2012
Posts: 113
Likes: 0
A 1 1/16 wrench for the EGR tube.
4 8mm bolts for the fuel rail.
8 7mm bolts for the coils.
10 13mm bolts for the lower intake.
Once you are there, attempt to pry gently and you will know for sure you got them all. And some extra muscle because it is heavy. I am waiting on a call back to ensure I covered everything. Be patient.
4 8mm bolts for the fuel rail.
8 7mm bolts for the coils.
10 13mm bolts for the lower intake.
Once you are there, attempt to pry gently and you will know for sure you got them all. And some extra muscle because it is heavy. I am waiting on a call back to ensure I covered everything. Be patient.
i removed the lower intake already i was missing the thermostat bolts how could of i miss those
i did not remove the supercharger those boltss are just to tight tried with all my strenght nothing a buddy of mine tried and nothing just left the blower their removed all the parts already have that lightning setup almost ready to get sold!!!1