Is the roush belt setup all ford products, or is it custom parts made for the 3v's?

I'm looking to purchase the drive belt setup separately and adapting a Whipple 2.3L blower.

So is their a way to buy those parts?

 

You can buy the set up from Roush

 

Ask rafa. That's what he had done on his truck.

Phil

 

yes and will the intake manifold with inter cooler fit from one brand to another or do I have to pay Roush 2800.00 to get one

 

Here is your parts list.

Roush Bridge 1104-8B603-AA(possible Ford PN#)
Idler x2 R07020008(Roush PN#)
Idler bolt x2 N811493-S309
Tensioner assembly R07020007(Roush PN#)
Tensioner bolts x3 N808920-S309
Bolt-Bridge to front cover R0705007(M8x75mm bolt and 8mm washer)(Roush PN#)

The bridge may be the same one use in lightnings, the Roush lower bridged pulley is the same one that is used in lightnings. Roush can be a pain in the rear to deal with so you might conact Neil over at TP to see if they can order the parts for you since they are a Roush authorized dealer. But I am pretty sure they are ford lightning parts.

If you need to look at a setup in person Maybe we could schedule a meet one weekend.

 

If you go with the whipple SC you will probable have to pick up the Whipple intake along with it.

 

Well this is going to get interesting, lol.

If I'm going to do this though, I'm going to do it right...

Rafa's ticket...

 

Minus all the labor cause I'm sure you'll do everything yourself.