In car vids of Eaton on 01 SuperCrew 4x4

Old Sep 12, 2006 | 11:49 AM
  #1  
raider's Avatar
Thread Starter
|
Suspended
Joined: Dec 2002
Posts: 638
Likes: 0
In car vids of Eaton on 01 SuperCrew 4x4

 
Reply
Old Sep 12, 2006 | 05:33 PM
  #2  
SCOTTE`screw's Avatar
Senior Member
Joined: Apr 2004
Posts: 282
Likes: 0
From: mass
nice vids,,,man looked like a hand full,doing the side step on ya

what were your times??
 
Reply
Old Sep 19, 2006 | 01:07 PM
  #3  
raider's Avatar
Thread Starter
|
Suspended
Joined: Dec 2002
Posts: 638
Likes: 0
Click Me

here is a side shot of the truck on my first run....this how NOT to launch off the line
 

Last edited by raider; Sep 19, 2006 at 01:22 PM.
Reply
Old Sep 19, 2006 | 01:27 PM
  #4  
chester8420's Avatar
Senior Member
Joined: Jan 2006
Posts: 2,835
Likes: 0
From: Vienna, Georgia
Seems like you have a problem with the truck shifting into 2nd and then back to 1st. Next time, put the shifter in 1st and manually shift into 2nd when the time is right. This will allow you to apply less than full throttle on the launch, and still be able to maintain 1st gear all the way to the optimum shift point.
 
Reply
Old Sep 19, 2006 | 01:30 PM
  #5  
raider's Avatar
Thread Starter
|
Suspended
Joined: Dec 2002
Posts: 638
Likes: 0
Originally Posted by chester8420
Seems like you have a problem with the truck shifting into 2nd and then back to 1st. Next time, put the shifter in 1st and manually shift into 2nd when the time is right. This will allow you to apply less than full throttle on the launch, and still be able to maintain 1st gear all the way to the optimum shift point.
it does that evertime I load a dif tune
 
Reply
Old Sep 19, 2006 | 05:58 PM
  #6  
GerRod's Avatar
Senior Member
Joined: May 2006
Posts: 1,177
Likes: 0
From: Baton Rouge, LA
raider, you need some slicks badly...all you're doing is spinning your tires...

looks like you got serious power though...
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 01:10 PM.