Does anyone have a pic of the power steering reservoir relocation bracketry wich is part of the Procharger installation?
I would like to copy it on my 4.6 Powerdyne. Thanx

 

Don't have any pics but I could make you a sketch tommorrow if I remember to. All it is, is a piece of Alum. channel..probably 2.00" tall with 0.75"-1.00" flanges. I'll try to get something for ya.

 

Here's a sketch.....


I can take a photo tommorrow evening.

 

Thanx CDB - Good drawing... a pic is worth...
I probably don't need the photo if you can tell where that bracket mounts.

 

It will mount where your air filter was located. You need to get a piece of hose to extend the PS resevoir and move it to the edge of the air box ledge.

Bill

 

Yeap...It mounts on the air box ledge as stated. Although I didn't have to extend the hoses any. They are tight though.

 

Thanx guys, that clarifies it.
I gained some slack in the hoses with the Powerdyne bracket by using longer bolts with 1 1/2" nylon spacers ......imagine a stack of washers, but nicer. It worked well in that set up, I gained the 1 1/2" in length for the hoses while lowering the bottle to make space.