calling all 12' sub owners! I want to see your setups in 04+ f150's
calling all 12' sub owners! I want to see your setups in 04+ f150's
well, I just got in my pioneer 4300 dvd and im now looking for what to do with a sub setup. Getting seat lifts isnt a problem for me atall, I just want the best sounding setup but keeping my stock seats.
I WILL BE USING A KICKER 750 RMS AMP (1500 BASICALLY)
I WILL BE USING A KICKER 750 RMS AMP (1500 BASICALLY)
Not mine but hope this helps.. Both of these are Down fire setups sealed.
Brypinks2 setup






Impact9's setup




Some of my Old Setups using a seat lift too....
Upfire:




Down fire:

But those are some options..
Brypinks2 setup






Impact9's setup




Some of my Old Setups using a seat lift too....
Upfire:




Down fire:

But those are some options..
Last edited by weazel; Apr 16, 2011 at 02:40 PM.
Trending Topics
What where the specs on this box? I want one just like this and what did you use for the seat lift???
2008 f150
Hey, I have an 08 F150 with a Pioneer Avic D3 and I am adding 1 shallow 12" subwoofer. This is the subwoofer. I have a rockford fosgate 400 watts rms amp.
http://www.pioneerelectronics.ca/POC...001S2|S4?tab=B
I want it to fire upwards and to only use the passenger side and middle space. Any recommendations on dimensions and design I would much prefer a ported box.
http://www.pioneerelectronics.ca/POC...001S2|S4?tab=B
I want it to fire upwards and to only use the passenger side and middle space. Any recommendations on dimensions and design I would much prefer a ported box.
Hey, I have an 08 F150 with a Pioneer Avic D3 and I am adding 1 shallow 12" subwoofer. This is the subwoofer. I have a rockford fosgate 400 watts rms amp.
http://www.pioneerelectronics.ca/POC...001S2|S4?tab=B
I want it to fire upwards and to only use the passenger side and middle space. Any recommendations on dimensions and design I would much prefer a ported box.
http://www.pioneerelectronics.ca/POC...001S2|S4?tab=B
I want it to fire upwards and to only use the passenger side and middle space. Any recommendations on dimensions and design I would much prefer a ported box.
I don't recommend porting a Slim sub, and if you were going to port a sub id use the large space on the driver side. Id try to port a stronger 10 under the seat.











