Hey guys i have been wanting a system in my truck for a long time now and i found this while cruising the internet. Tell me what you guys think of the box and how its set up. Any opinions and whatever else you guys have for information to lead me in the right direction is much appreciated!.

Here is the link:

http://supercrewsound.com/commerce/p...dId=7&catId=56

 

A ton of people use that site and are thrilled with the results.

 

Ok sweet so the way its setup is good? Like the speakers facing the ground and stuff is fine? I already have the subs and amp so i don't need to worry about those. Can anyone post some pics of there set up like this one? Thanks guys!

 

I was originally looking at that site for a sub box. I heard that some people had issues with air space.

 

OH really? I was thinking the same thing but not too smart when it comes to systems.lol. Im not looking for the hardest hitting system out there i just want something that when i want to blast my metal or rock music i am satisfied with the sound and how the system hits.

 

What spks and amps do you have?

 

I'd ask Low e Red. He seems to know what he is talking about.

edit: Just saw he replied.

 

IF YOU STUFF YOUR BOX YOU CAN TRICK THE SUB A BIT AROUND 15% MORE GAIN in AIR SPACE 1b POUND to 1CF

 

Two 10 in. pioneer primeir subs. with an Xplod amp. Im not sure how many watts the amp it is but its says its a class D, so if you know how man watts it is let me know.lol. Is that stuff any good? It was my brothers stuff and never heard the system before.

 

Which premiers? And which Xplod amp? Look at the bottom of the amp, should give you a model number. Same with the premiers, just look around the woofer. Will be able to help you better with that.

 

Those pioneer subs might be too deep.

 

I don't know about the premiers because they are mounted in little boxes right now. But my brother says they are the flat ones or something like that. The amps model number is XM-SD51X and on the front it says Class D if that helps at all. Sorry for the lack of information im kinda new to all this.

 

According to Sony's site that amp is 500 x 1 RMS @ 2 ohms and 250 x 1 RMS @ 4 ohms.

Do the subs look like these: http://www.pioneerelectronics.com/PU...low/TS-SW1041D

 

So is that amp good for what I want? And yea those are the subs.

 

Should be fine. It seems to be a pretty good match for the subs you are powering.