Bed Cuts!
Senior Member
Joined: Dec 2007
Posts: 1,730
Likes: 0
From: the woodlands tx
haha you screwed up twice the first time you said pandpass and the second time you said pandapass lol its cool i know what you mean but that setup you said would be sweet!
Technical Article Contributor
Joined: Aug 2006
Posts: 7,862
Likes: 0
From: Northern California
when i saw you call it pandpass the first time, i almost posted up a picture of a panda.
Senior Member
Joined: Apr 2007
Posts: 4,494
Likes: 0
From: Slidell, LA
Im not sure what the Sd of an L7 is since its square, never looked before, but I would still bet cone advantage goes to the G5s and PRs...
I dont know if you were planning sealed or ported for the L7s I guess either...
Low can probably give you a better idea of what would be louder.
Give me a G5 over an L7 anytime, anywhere, as far as SQ goes...If you can get the PRs tuned nicely.
I dont know if you were planning sealed or ported for the L7s I guess either...
Low can probably give you a better idea of what would be louder.
Give me a G5 over an L7 anytime, anywhere, as far as SQ goes...If you can get the PRs tuned nicely.
LxW = A:2 12 L7's = 288 sq in of cone area... 12x12= 144 x 2
Senior Member
Joined: Apr 2007
Posts: 4,494
Likes: 0
From: Slidell, LA
God you are dumb... 
go a 4th order and it CAN be smaller. Depending on the tuning the 6th can be tiny as hell!
go a 4th order and it CAN be smaller. Depending on the tuning the 6th can be tiny as hell!
Senior Member
Joined: Sep 2003
Posts: 6,760
Likes: 4
From: Nebraska
Yeah, but the cone isnt actually 12x12.....besides, I need it converted to centimeters since I know 310, 480, etc.....I dont do conversions.
Senior Member
Joined: Jan 2006
Posts: 3,700
Likes: 0
From: my apartment
pandapass is more efficient than ported. the power of the panda adds 20 debezz
the thing with subs is you can have a small enclosure, high efficiency, or low end extension. pick two. id give up the small enclosure in a minute if I was cutting my bed
the thing with subs is you can have a small enclosure, high efficiency, or low end extension. pick two. id give up the small enclosure in a minute if I was cutting my bed
Senior Member
Joined: Apr 2007
Posts: 4,494
Likes: 0
From: Slidell, LA
What do you live in Canada?!? Centimeters?!?!
P.S. I am completely *******ed up.
Senior Member
Joined: Jun 2006
Posts: 4,719
Likes: 0
From: Maricopa, AZ
Thread Starter
|
Member
Joined: May 2008
Posts: 40
Likes: 0
From: Dallas, Tx
Yeah but I was looking for an alterative to doing the bed cut! If I can get around the same bass level from it!
The thing is they told me that I can just seal up hole from bed cut with metal from home depot or something and put the drop in bed liner back in and no one will notice from everyday looking!
My thing is I have heard the bed cut with 2 S12L7 and just 1 SX1250.1 and it is nice but I have 2 SX1250.1 and so it will be bigger and badder in a sense!
I am trying to see if I can forego the bed cut and do something with G5/GTRs and get same bass but keep my backseat for passenger purposes!
The thing is they told me that I can just seal up hole from bed cut with metal from home depot or something and put the drop in bed liner back in and no one will notice from everyday looking!
My thing is I have heard the bed cut with 2 S12L7 and just 1 SX1250.1 and it is nice but I have 2 SX1250.1 and so it will be bigger and badder in a sense!
I am trying to see if I can forego the bed cut and do something with G5/GTRs and get same bass but keep my backseat for passenger purposes!
Technical Article Contributor
Joined: Aug 2006
Posts: 7,862
Likes: 0
From: Northern California
Senior Member
Joined: Dec 2007
Posts: 1,730
Likes: 0
From: the woodlands tx