First install in '05 Supercrew. Help

Old Mar 12, 2008 | 01:34 AM
  #1  
se7n's Avatar
Thread Starter
|
Member
Joined: Mar 2008
Posts: 31
Likes: 0
First install in '05 Supercrew. Help

I have been searching for the past couple weeks, trying to compile my set of directions for my Amp/Sub install. I ordered a single 12" under seat box and a Kicker 12" CVT last week. I'm still deciding on an amp but my question isn't about the amp. I was wondering if anyone would like to lay out for me what else I'll be needing.

I'm not sure about the LOC? Do you absolutely have to tap into the stock wires or can you buy a premade harness?

That's actually pretty much my only question. Once I figure out my RCA outputs I think I should be set. Any tips or suggestions would be much appreciated to make my life a little easier

thanks
 
Reply
Old Mar 12, 2008 | 03:31 PM
  #2  
wakebrdr142's Avatar
Member
Joined: Feb 2008
Posts: 81
Likes: 0
From: Russellville, AR
Wiring Kit?
 
Reply
Old Mar 12, 2008 | 05:58 PM
  #3  
chenchio's Avatar
Member
Joined: Jan 2008
Posts: 63
Likes: 0
From: texas
Amp wiring kit, and RCA conversion kit if you are running the stock cd player.
thats it.
 
Reply
Old Mar 12, 2008 | 06:02 PM
  #4  
chenchio's Avatar
Member
Joined: Jan 2008
Posts: 63
Likes: 0
From: texas
I wouldnt risk it if you dont know what you are doing. I paid $60 bucks at circuit (amp,sub installation) and they did an awesome job.
 
Reply
Old Mar 12, 2008 | 10:03 PM
  #5  
Low_e_Red's Avatar
Senior Member
Joined: Apr 2007
Posts: 4,494
Likes: 0
From: Slidell, LA
Originally Posted by se7n
I have been searching for the past couple weeks, trying to compile my set of directions for my Amp/Sub install. I ordered a single 12" under seat box and a Kicker 12" CVT last week. I'm still deciding on an amp but my question isn't about the amp. I was wondering if anyone would like to lay out for me what else I'll be needing.

I'm not sure about the LOC? Do you absolutely have to tap into the stock wires or can you buy a premade harness?

That's actually pretty much my only question. Once I figure out my RCA outputs I think I should be set. Any tips or suggestions would be much appreciated to make my life a little easier

thanks
Go buy a harness and reverse harness. Then wire the LOC between them... It makes life much easier.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 04:34 PM.