fiberglass sub enclosure in 06 supercab
#1
fiberglass sub enclosure in 06 supercab
i have a 06 scab and i want to move my center console forward six inches to make a room for a custom fiberglass sub box between the back on my center console and the front of my rear seat.i was wondering if anyone has done something similar to this before. advice or pictures would be greatly appreciated. thanks.
#2
#3
Not a Scab, but this is what I did in my 06 Screw
Thats a 10" sub. I built another box that has two 12's (on in front of the console and one behind) and had to relocate the factory console. I don't know which console you have but on the folding arm rest one I took the plastic covers off the legs of it and used the various holes in the metal legs to attach the console to the sub box. Then put the plastic covers back on.
Thats a 10" sub. I built another box that has two 12's (on in front of the console and one behind) and had to relocate the factory console. I don't know which console you have but on the folding arm rest one I took the plastic covers off the legs of it and used the various holes in the metal legs to attach the console to the sub box. Then put the plastic covers back on.
Last edited by Anarchy_Customs; 09-15-2007 at 12:26 AM.
#4
hey thanks a lot for the picture and the info. i actually saw a picture of this enclosure for sale on ebay from you guys, i emailed you if you made one for a scab but i guess you guys hadnt yet so i am going to try and make one similar for my scab. have any advice for me on glassing and forming? i havent glassed anything but minor patches on my surfboard before so this could be interesting. oh and i have the xlt console not the jumpseat. thanks again