Wire Harness needed

Thread Tools
 
Search this Thread
 
  #1  
Old 07-22-2007, 12:25 PM
MrThor's Avatar
Junior Member
Thread Starter
Join Date: Jul 2007
Location: McHenry IL
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Wire Harness needed

This is my problem. I purchased a 2006 Mark LT with the original wires behind the dash cut and missing. The previous owner did a hack job when installing a aftermarket radio and when he traded it in he installed a factory f150 radio with a different harness. Not the original 6 disc, mp3 w/ sub. I am looking for a original factory wire harness so I can match up the all the factory wires & install a new factory 6 disc and get my steering wheel controls & sub working again. Anyone out there have a original 3 plug radio, sub harness they want to part with?

Thank you

Thor
 
  #2  
Old 07-22-2007, 02:37 PM
HawgPhixer's Avatar
Member
Join Date: Jul 2007
Location: Hillsborough, NC
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
You could get on of these and splice/solder it in to get your factory plug back.
http://cgi.ebay.com/SCOSCHE-FD23RB-F...QQcmdZViewItem
Here is a pic of my 2004 SCab OEM connector(B&W pic but it is really red)


Hope this helps
 
  #3  
Old 07-22-2007, 03:45 PM
rayu112582's Avatar
Junior Member
Join Date: Jul 2007
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
  #4  
Old 07-23-2007, 01:01 PM
MrThor's Avatar
Junior Member
Thread Starter
Join Date: Jul 2007
Location: McHenry IL
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
I was in contact with the installer site by phone. I was told that the wires are not the same colors as factory and I would have to buy a extra program and match them up one by one. I would prefer a used factory harness to make the job much easier!
 



Quick Reply: Wire Harness needed



All times are GMT -4. The time now is 09:01 AM.