Being that I am not willing at the moment to do a seat lift, this appears to be my options for my 06 screw: One Kicker S8L7 (.7 cuft & 300 rms), Two JL 10w1v2 (.5 cuft & 150 rms), MTX 4510 (.5 cuft & 225 rms), or one of the prefabed boxes.

I listen to country and hip hop. The car I had before had two JL 12w3v2 with 300 rms each in a sealed box (1.25cuft each) rear facing. I know these options will not live up to that, but I want it to maximize the conditions given. (Should i just give in and do a seat lift and try to figure how to use the 12w3's??)

If a prefab box is not the choice, should the sub face up or down?

Thanks in advance for your opinions....

 

You can fit the 12W3v2's downfiring in a self made box if you are willing to get a seat lift.

 

It kinda gets me excited the more I think about having the two 12w3's in my screw vs a single 8" or 10". I do not really have to worry about people sitting in the back on a regular bases anyways, and kids are still a few years away (not that they will notice a height difference for several years).

With my current setup I have one 300w rms amp on each sub and one 4 channel for the doors. How much room is there behind the rear seat? Based on the pictures I have seen it looks like they will fit.

 

My friend at the local stereo shop has a loaded probox being delivered for my 05 Scab this Thursday. I want to see how loud it is. The probox rep says the box has a 10" dvc sub w/ 500rms in a ported box. We're going to install it Friday & connected it to quantum audio 800watt rms mono amp. Right now, I have a prefab box from a ebay seller with a MTX sub from circuit city. It has about 200 watts rms. Upgraded my highs to Infinity Kappa series 6x7, now gotta do lows. I will post pics Friday or Saturday with my opinions.