where can i get a box that will fit either 2 kicker 10" or 12" CVR's? I cant find anything for a 95 regular cab pickup. I would like to go with the 12s but if worst comes to worst i would go 10's

 

If your good hand tools, can work with numbers to figure airspace, tuning, etc out, and read up/do your homework on how to build a good box, I would suggest making one yourself. Prefab boxes usually suck IMO

Most of the time its way cheaper to make one yourself, not to mention you can make it to pretty much whatever shape you want, the specs you need, etc, and tell everone you made that awsome box behind your seats when they ask

Im not sure if its possible to fit 2 12's back there, I havent seen the amount of room in an older standard cab, or what people have fit back there. But if your tall and have to have the seat all the way back, or almost all the way back, it might not be possible to fit 2 12's in. But like I said, Im not to familar witht eh older reg. cabs, so someone who knows can tell you for sure.

 

alright. well any sites that can help do the math for making a ported box or help me along with one?

 

Download WinISD or Blaubox software at the following address.
http://diyaudiocorner.tripod.com/software.htm

There are other box building software on the site. I'm familiar with Blaubox and WinISD.

 

Yup, your def. going to need WinISD.

http://www.linearteam.dk/

^that is a good site for figuring out port dimensions, also has WinISD on the net so you dont have to download it if you dont want to.

bcae1.com can help you with box building some and a lot of other audio questions.

If you have any questions about anything, just ask, thats what we're all here for.