Post your times and mods

Thread Tools
 
Search this Thread
 
Old May 25, 2009 | 05:48 PM
  #1  
Roush Nitemare's Avatar
Thread Starter
|
Member
Joined: May 2009
Posts: 38
Likes: 0
Post your times and mods

i have a roush 2007 roush f150 single cab
runnning stock 5lbs of boost, LT headers, electric fans and a tune which aint that great the person who tuned my truck only managed to get 10hp out of it.
ive ran a best of 13.61 at 101 with traction problems on 20's and street tire.
 
Reply
Old May 25, 2009 | 07:05 PM
  #2  
GerRod's Avatar
Senior Member
Joined: May 2006
Posts: 1,177
Likes: 0
From: Baton Rouge, LA
That's a very good ET. It's better than most considering the mods you have. Mike Troyer at Troyer Performance is among the best at tuning Roush supercharged trucks. He also has a +2 lb pulley that'll give you about 8 or so psi. His pulley and custom tune will get you in the neighborhood of 40 rwhp. That with drag radials should put you pretty close to 12s considering what you've run with your current mods.9

I ran a 14.0 with a 2.19 60' in 83 F and 60% humidity. Had traction problems too.

Mods in my Sig....
 

Last edited by GerRod; May 25, 2009 at 07:09 PM.
Reply
Old May 25, 2009 | 07:05 PM
  #3  
FL4X4's Avatar
Senior Member
Truck of the Month
Joined: Mar 2007
Posts: 479
Likes: 0
From: florida
hrm ill try, 6.0l diesel :sct tuner..thats it

8.3@75mph on 275s, 1/8th mile of course
 
Reply
Old May 25, 2009 | 07:53 PM
  #4  
Roush Nitemare's Avatar
Thread Starter
|
Member
Joined: May 2009
Posts: 38
Likes: 0
everyone says mike troyer and jdm engineering are some of the best ford tuners out there.
but isnt a actual dyno tune better than a mail order tune?
 
Reply
Old May 25, 2009 | 08:17 PM
  #5  
GerRod's Avatar
Senior Member
Joined: May 2006
Posts: 1,177
Likes: 0
From: Baton Rouge, LA
Originally Posted by Roush Nitemare
everyone says mike troyer and jdm engineering are some of the best ford tuners out there.
but isnt a actual dyno tune better than a mail order tune?
A dyno tune would be better if you can find someone who knows how to tune an F150 with Roush code.

I had my truck dyno tuned by a local guy who specialized in Mustangs. As soon as it turned cold, my truck started pinging. He changed the tune 4 times and couldn't fix it. Got mail order tunes from Troyer and my truck ran like a champ. Mike's mail order tunes are better (for Roush trucks) than most tunes done on dyno's.
 
Reply
Old May 25, 2009 | 09:44 PM
  #6  
FX4 Matt's Avatar
Registered User
Joined: Feb 2005
Posts: 2,679
Likes: 0
From: Cape Cod, Ma
Best time of 13.6 @100 not to bad for a 4X4 Crew Cab
 
Reply
Old May 25, 2009 | 10:25 PM
  #7  
Roush Nitemare's Avatar
Thread Starter
|
Member
Joined: May 2009
Posts: 38
Likes: 0
Wow, fx4 matt how did u manage to get 419rwhp?
i had mine tuned with someone who specialized in mustangs as well and only managed to get 10hp out of my truck with a dyno tune...
i was gonna get a mail order tune from mike troyer but when i called they were on a delay and it was gonna take about 10 wks to get my tune.
what does mike troyer set the shift points at?
 
Reply

Trending Topics

Old May 25, 2009 | 10:48 PM
  #8  
FX4 Matt's Avatar
Registered User
Joined: Feb 2005
Posts: 2,679
Likes: 0
From: Cape Cod, Ma
Originally Posted by Roush Nitemare
Wow, fx4 matt how did u manage to get 419rwhp?
i had mine tuned with someone who specialized in mustangs as well and only managed to get 10hp out of my truck with a dyno tune...
i was gonna get a mail order tune from mike troyer but when i called they were on a delay and it was gonna take about 10 wks to get my tune.
what does mike troyer set the shift points at?
My truck has been tuned by the best Mike at Troyer Performance, I have seen 430 on one dyno I went to I didnt belive it but they are all different. I dont know where you are from If I were you and are some what close to Covington Va I would just go there and you would jump the line.
My shift points are 5200 heres a little vid


http://www.youtube.com/watch?v=5HgrECc-2Uo
 
Reply
Old May 25, 2009 | 11:21 PM
  #9  
Roush Nitemare's Avatar
Thread Starter
|
Member
Joined: May 2009
Posts: 38
Likes: 0
it moves pretty good, how much did the porting help you out?
im no where close to that, i live in edinburg tx
 
Reply
Old May 25, 2009 | 11:29 PM
  #10  
FX4 Matt's Avatar
Registered User
Joined: Feb 2005
Posts: 2,679
Likes: 0
From: Cape Cod, Ma
Originally Posted by Roush Nitemare
it moves pretty good, how much did the porting help you out?
im no where close to that, i live in edinburg tx
The port was good for about 20 at the wheel. At around $400 its not a bad mod, But if you do it you *HAVE* to get tuned for it or you will pop your 5.4 plus it makes the blower wine a little louder and we all like that.


your only a 26 hour drive from Troyer lol
 
Reply
Old May 25, 2009 | 11:32 PM
  #11  
Roush Nitemare's Avatar
Thread Starter
|
Member
Joined: May 2009
Posts: 38
Likes: 0
ill prolly get it done and tuned
 
Reply
Old May 26, 2009 | 12:44 AM
  #12  
Roush Nitemare's Avatar
Thread Starter
|
Member
Joined: May 2009
Posts: 38
Likes: 0
fx4matt what coils are you using?
 
Reply
Old May 26, 2009 | 10:10 AM
  #13  
FX4 Matt's Avatar
Registered User
Joined: Feb 2005
Posts: 2,679
Likes: 0
From: Cape Cod, Ma
Originally Posted by Roush Nitemare
fx4matt what coils are you using?
Granatelli W/ Brisk plugs
 
Reply
Old Jun 23, 2009 | 10:06 AM
  #14  
jrfonte's Avatar
Senior Member
Joined: Nov 2008
Posts: 626
Likes: 0
From: se texas
Originally Posted by FX4 Matt
My truck has been tuned by the best Mike at Troyer Performance, I have seen 430 on one dyno I went to I didnt belive it but they are all different. I dont know where you are from If I were you and are some what close to Covington Va I would just go there and you would jump the line.
My shift points are 5200 heres a little vid


http://www.youtube.com/watch?v=5HgrECc-2Uo
lol nevermind i had a brain fart.
 

Last edited by jrfonte; Jun 23, 2009 at 10:11 AM.
Reply
Old Jul 1, 2009 | 06:08 PM
  #15  
jdruzik's Avatar
Senior Member
Joined: Oct 2008
Posts: 2,707
Likes: 2
From: Glide, OR
Who said FORD trucks weren't FAST... OUTSTANDING...


 
Reply




All times are GMT -4. The time now is 02:41 AM.