OK, took a look at the rotors on my newly obtained truck and it looks like they're really thin. I will take them to get turned, but they might be to thin for that. Where can I get good plain (non slotted or cross-drilled) rotors that are somewhat reasonable in price (an online place is fine). I looked at Autozone, but they want $100 (my Z-28 rotors were $40). I guess I'll have to pay more $$ since the hubs are part of the rotor. Oh, and I will most likely need new pads too, so looking for those too.

 

$100? The rotors for my 96 were about $40 or so at AutoZoo. Try again, you may have rin into a more than normally incompetent clerk. Try another parts store too.

 

Mine were about $100+ at Autozone as well get your pads there atleast.....$35 with a lifetime warantee..when they wear out just bring them back before they get to the metal and they give you new ones for free and you can do that for the rest of your life.

 

Called Pep-Boys, and they have them in stock for $49.

That's better. I guess I will also need new bearings.

 

ya..bearings would be a good idea too.

 

I bought my pair of rotors at Autozone for $80

 

I bought rotors from Autozone today for $45 a piece. They already had bearing races pressed in. Sweet. Now I need to install them tomorrow or on the weekend. Also bought some Performance Friction pads and new bearings.