does anyone make a kit or anything for this or is it even worth the effort? the nicks and dings on my truck are finally starting to add up, so i've really been wishing it was 4wd lately so i could take it out on trails etc, any advice greatly appreciated

 

go to a junk yard and start ripping apart a 4wd f150...everything is just bolt on...except for drilling a hole in the floor-board for the 4wd stick.

 

Would the parts from an f-350 bolt up the same, id like to get the tougher axles if its not any more difficult

 

to make it easy, it would be best to stick to 1/2 ton stuff. try doing a search, i asked this samequestion a coupl eof months back and someone had replied to my post and gave me the address to a website that listed the whole processofthe conversion step by step. good luck!

 

I posted this link when donate posted the same question...2x4 - 4x4
you now have to register to see it.

 

Cool, thanks for all the help guys

 

a 4x4 conversion might be down the road for me to..but It's hard to imagine those beautiful I-beams no longer there.