I have a stock '94 F-150 ex cab regular bed, stock height. I was wondering if i could fit 33's in there without lifting it or rubbing. Has anyone had any success with that?

 

No chance on a 2WD. On a 4WD, you're going to get some rub at full steering lock and will have to spacer the bumper out a skosh

 

Your not gonna get 33's on it with out rub period 2wd or 4wd your gonna eat the fenders on it!

 

with the stock or stock depth wheels it can work. 33x10.50x15s fit nicely, 33x12.50x15s will rub like SR said, shim the bumper and be prepared for them to kiss to radius arms.

 

I ran 24's with 33 inch tires and about 11.5 inches wide on a 2wd and i only had to trim the bumper aboit have an inch

 

Use this as an excuse to level the truck. The pre-97s sit even worse than the new trucks do stock. Then, 33s will fit great. And it will look a whole lot better.

If you dont plan on leveling the truck, get some 32s and be happy with them.

 

My 4x4 has 31s with stock height and i wouldnt go any bigger without a lift.

 

Exactly i have a 96 on 31's and I wouldn't attempt to put 33's on it and i have a 88 and its the same way Ive got 32's on it but the 33's catch the fender and bumper on 10" wheels

 

You can put 31s on a 2WD

But 33x10.50x15s don't use a 10" rim, they fit properly on a stock 7.5" rim

 

i have a 1993 ford f150 and i run 33/12.5/15's with no problem on 11 in wide 3 in backspace rims with no problem. but i have an homemade bumper but i have had no issues with rubbing on anything mudflasng besides mud flaps now and then.
get smaller back space rims problem solved

 

Yet another zombie thread rises from the dead.

Why are you replying to a post that is over 2 years old?

 

I don't even recognize some of the posters.

Adrianspeeder

 

okay, so since this is closer to time stamp, I have a question.
Stock 96 4X4, ext cab. what lift would you use to raise front end just enough to be noticed and install 33's?

 

k 4"

 

Stock height, 33's, front bumper moved forward 1/2 inch.





Adrianspeeder