Best way to get wires through the firewall??
#1
#2
Join Date: Nov 2006
Location: Memphis, TN 38135, USA, Earth
Posts: 5,495
Likes: 0
Received 7 Likes
on
7 Posts
The best way is to go to a junkyard & remove some pins from a firewall connector (near the e-brake pedal), add them into your truck's connectors, then splice your light wiring to them. Very similar to what's shown here:
But there are plenty of rubber grommets & plugs in the firewall that you can just push your wires through. One is under the R hood hinge beside the recirculate motor shown here:
It's the same grommet that the harness with that vacuum line comes through, visible in the last of those pics.
But there are plenty of rubber grommets & plugs in the firewall that you can just push your wires through. One is under the R hood hinge beside the recirculate motor shown here:
It's the same grommet that the harness with that vacuum line comes through, visible in the last of those pics.