Hello all, I have a 94 F150 and for some reason, the washer fluid only come out of one port when it sprays at the windshield. I've tried to get to the line but it seems theres no way to get to it. How do I fix this problem or get to the line?

 

Try poking a small wire into the nozzle openings, they may be clogged.

 

Ford advises against putting anything backward into the nozzles (including air) because of their delicate mechanism. If it's blocked, replace it. There are screws in the wiper valance along the w/s trim, and more holding the hood rear seal on.

. . .

Once you can get your hand under the valance, squeeze the 2 catches on the nozzle & push it straight up thru the valance before unhooking the hose.