Pre-1997 Models

Info needed

Thread Tools
 
Search this Thread
 
Old Aug 29, 2006 | 08:44 AM
  #1  
dragonfly94's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2005
Posts: 3
Likes: 0
From: Kentucky
Info needed

I'm looking for some information on part numbers or calibration code for the PCM (engine computer) and maf sensor for a 1994 F-150 with a V8 E4OD setup. I'm looking to go to a junkyard this weekend and look for these parts. Does anyone have any of this information? If not I would appreciate any help in pointing me in the right direction.
 
Reply
Old Aug 29, 2006 | 09:48 AM
  #2  
kretinus's Avatar
Senior Member
Joined: Oct 2005
Posts: 335
Likes: 0
The SD to MAF conversion on your truck doesn't appear to be as simple as going to the junk yard because the E40D is computer controlled. From what I've read here and elsewhere, there's only a few specific models of California Broncos that have the right computer.
 
Reply
Old Aug 29, 2006 | 10:18 AM
  #3  
dragonfly94's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2005
Posts: 3
Likes: 0
From: Kentucky
I figured that if I found a truck with MA with an E4OD it should work. Now I've seen some trucks that have this combination and to my understanding all 94's except the Lightnings had MA and some of them had the E4OD. Now how rare a beast that truck would be I don't know. I'm not limiting myself to F-150, I do know they ran the 351W in some F-250's.
 
Reply
Old Aug 29, 2006 | 01:01 PM
  #4  
kretinus's Avatar
Senior Member
Joined: Oct 2005
Posts: 335
Likes: 0
BIO0 5.8 Bronco, F-x50 E-x50 MAF / E4OD / F5TF-12A650-BYA (see note 1)

AKC0 5.8 93-95 Lightning MAF / E4OD / F8TF-12A650-NA (see note 1)
 

Last edited by kretinus; Aug 29, 2006 at 01:12 PM.
Reply




All times are GMT -4. The time now is 04:46 AM.