Pre-1997 Models

Transfer Case in 85 F150

Thread Tools
 
Search this Thread
 
Old Dec 5, 2005 | 12:03 PM
  #1  
mjeselskis's Avatar
Thread Starter
|
Member
Joined: May 2004
Posts: 54
Likes: 0
Transfer Case in 85 F150

Can anyone tell me what transfer case is in an 85 F150 with a 302 and T-18 transmission? Or somewhere to look the information up would be ok too. Also what rearend did the 85's have in em? Thanks
 
Reply
Old Dec 5, 2005 | 01:06 PM
  #2  
adrianspeeder's Avatar
Senior Member
20 Year Member
Liked
Loved
Joined: Dec 2004
Posts: 5,008
Likes: 28
From: Dover AFB DE / Harrisburg PA
NP-208 with a 9" rear.

Adrianspeeder
 
Reply
Old Dec 5, 2005 | 01:18 PM
  #3  
mjeselskis's Avatar
Thread Starter
|
Member
Joined: May 2004
Posts: 54
Likes: 0
Originally Posted by adrianspeeder
NP-208 with a 9" rear.

Adrianspeeder
Thank you
 
Reply
Old Dec 5, 2005 | 01:27 PM
  #4  
adrianspeeder's Avatar
Senior Member
20 Year Member
Liked
Loved
Joined: Dec 2004
Posts: 5,008
Likes: 28
From: Dover AFB DE / Harrisburg PA
You can kinda see the shifter here...

 
Reply
Old Dec 5, 2005 | 04:24 PM
  #5  
mjeselskis's Avatar
Thread Starter
|
Member
Joined: May 2004
Posts: 54
Likes: 0
Originally Posted by adrianspeeder
You can kinda see the shifter here...

Anyone know what the input spline count is on the 208? I am wondering if I can bolt on a NP231 behind the T18 instead of the 208 and cant find any info on the spline count.
 
Reply
Old Dec 5, 2005 | 04:47 PM
  #6  
rutherk1's Avatar
Senior Member
Joined: Sep 2005
Posts: 514
Likes: 0
Originally Posted by mjeselskis
Anyone know what the input spline count is on the 208? I am wondering if I can bolt on a NP231 behind the T18 instead of the 208 and cant find any info on the spline count.
The 208 is loads stronger than the 231.

They were both avaliable in different spline counts. I think the 208 could be either 28 or 31
 
Reply




All times are GMT -4. The time now is 04:46 AM.