ok if its not in my sig, I have an 85 4.9 1brl carbed engine (all stock) and am tired of the manifolds (plural) bolts loosening. I have a brand new exhaust man that is only a little more than a year old and its already warping and had a really bad crack in one of the exhaust ports that I had welded (which I know shouldnt have been done anyway). Intake is also on its way to being badly warped and i'm tired of it! I thought that the the EFI equipment from an earlier 4.9 F150 will bolt up to my head, then heck i'll go to the JY and get everything i need.

So basically I need to know if anyone has done it, or known someone who has. I know i'm going to need exahust & intake man, injectors, computer, etc, but i need to know if the intake and exhaust mans from a newer 4.9 EFI F150 will bolt right up to my head? And any other info or advice that will assist me on this project, i'm aiming on starting on this early fall. or as soon as i'm done toying with my race car for the summer.

 

Check out http://fordsix.com


It's been done..

Good luck!!!