Pre-1997 Models

94 starting problem

Thread Tools
 
Search this Thread
 
Old May 11, 2005 | 02:39 AM
  #1  
Atomix's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2005
Posts: 6
Likes: 0
94 starting problem

I looked a bit through the threads but couldn't find the problem that I'm having..

Turn the key, and the truck will crank real hard, after the cranking it will take a second, and then fire kind of oddly, and then sputter into existence..

Sometimes when I'm going home for work, it will crank real hard, but won't start. If I put in some gas, it will start, but otherwise it'll just try starting really hard but won't get anywhere.

any suggestions on things to check?

-stew
 
Reply
Old May 17, 2005 | 10:02 AM
  #2  
daniel3312's Avatar
Senior Member
Joined: Feb 2003
Posts: 147
Likes: 0
From: Osceola Arkansas (50 Miles North From Memphis TN)
My 92 had pretty much the same problem when i ran off the front tank and it would up bein the fuel pump sounds like its defiently a fuel problem since it starts when u put gas in




good luck


Daniel
 
Reply
Old May 27, 2005 | 06:43 AM
  #3  
PKRWUD's Avatar
Senior Member
Joined: Sep 1999
Posts: 3,083
Likes: 0
From: Ventura, California
Yes, you need to check the fuel pressure, and also see how fast it bleeds down when you turn the key off.
 
Reply
Old Jun 1, 2005 | 09:44 PM
  #4  
bigbronc's Avatar
Senior Member
Joined: Dec 2004
Posts: 1,085
Likes: 0
From: poquoson virginia
check your base timing. 10 degrees before tdc. With the spout connector disconnected. This is the little plug just in front of the connector on the ignition module on the distributor.

Robbie
 
Reply




All times are GMT -4. The time now is 06:40 AM.