Pre-1997 Models

back fire on idle

Thread Tools
 
Search this Thread
 
Old Jan 6, 2005 | 03:25 PM
  #1  
jut's Avatar
jut
Thread Starter
|
Junior Member
Joined: Jun 2004
Posts: 4
Likes: 0
From: hays, ks
back fire on idle

a newbie here

i have a liitle problem with backfiring on my truck at idle. i have long tube headers with glasspacks with true duals. it seems to only backfire on the drivers side. it only does it on idle and seems to not do it when the tank is full. but i might just notice it then. i have no other mods on my 89 5.0L with a manual. thanks for the help in advance.
 
Reply
Old Jan 6, 2005 | 04:44 PM
  #2  
LeClarion's Avatar
Senior Member
Joined: Dec 2004
Posts: 150
Likes: 0
From: Omaha, Nebraska
I don't know how right this is, but try your timing. I don't know if it affects it at idle, but from what I have heard, puttign high flow exhaust on can change what your timing needs to be, but I have only heard of that affecting it when letting off the gas from a high idle. I would get under the hood and try a few degrees to either side, but wait until someone that knows what they are talking about can confirm or deny what I am telling you.
 
Reply
Old Jan 6, 2005 | 06:14 PM
  #3  
Yankee7985's Avatar
Senior Member
Joined: Feb 2001
Posts: 776
Likes: 0
From: Guyton, GA USA
I would also have to say that your timing is incorrect. You should check it.
 
Reply
Old Jan 20, 2005 | 07:09 PM
  #4  
Ford_5.8's Avatar
Junior Member
Joined: Jan 2005
Posts: 2
Likes: 0
I put headers on My 89 f150 5.8 and when i put the plug wires back on it started back firing and i got one of my plug wires mixed up
 
Reply




All times are GMT -4. The time now is 03:41 PM.