'99 or '01-'04 Lightning supercharger assembly (95% complete)
Thread Starter
|
Senior Member
Joined: Apr 2004
Posts: 13,678
Likes: 82
From: missing Texas...
'99 or '01-'04 Lightning supercharger assembly (95% complete)
I have a '99 lightning supercharger assembly - everything you need to install except:
1 - fuel pump
2 - injectors
3 - heat exchanger brackets
4 - i/c pump bracket
5 - crank pulley and belt
6 - MAF
7 - misc nuts and bolts
The eaton, midplate, lower intake, upper plenium have all been ported. stock size i/c coolant tank. stock i/c pump. stock air box for a 90mm MAF. the pulley bridge has the stock tensioner, one 100mm idler and one stock idler.
I also have the opportunity to purchase a '01-'04 lower intake and midplate for $500 and I have a spare ported eaton for the '01-'04 trucks (it would need an i/c core most likely).
I really need to get a twin screw so I'm going to ask $3200 for the '99 ($3700 for the '01-'04) assembly with the missing pieces or $3800 for the '99 ($4200 for the '01-'04) with the missing parts gathered (it might take me a couple weeks) these are all parts I was going to use on my truck and I am very picky so they are in great shape.
for an additional couple hundred I would be willing to ensure you have a 100% bolt on kit (minus tune)
all parts are located in Germany, asking price is shipped via the USPS. I do not have to sell anything, my parts are well above average hence the higher asking prices VS some of the other parts you see advertised.
if you don't like the asking price: go someplace else with your money and attitude don't even waste my time.
* I will also consider parting with my Procharger P1SC, 2 core assembly off of my green truck (minus the MADs prototype pieces) for $3400
1 - fuel pump
2 - injectors
3 - heat exchanger brackets
4 - i/c pump bracket
5 - crank pulley and belt
6 - MAF
7 - misc nuts and bolts
The eaton, midplate, lower intake, upper plenium have all been ported. stock size i/c coolant tank. stock i/c pump. stock air box for a 90mm MAF. the pulley bridge has the stock tensioner, one 100mm idler and one stock idler.
I also have the opportunity to purchase a '01-'04 lower intake and midplate for $500 and I have a spare ported eaton for the '01-'04 trucks (it would need an i/c core most likely).
I really need to get a twin screw so I'm going to ask $3200 for the '99 ($3700 for the '01-'04) assembly with the missing pieces or $3800 for the '99 ($4200 for the '01-'04) with the missing parts gathered (it might take me a couple weeks) these are all parts I was going to use on my truck and I am very picky so they are in great shape.
for an additional couple hundred I would be willing to ensure you have a 100% bolt on kit (minus tune)
all parts are located in Germany, asking price is shipped via the USPS. I do not have to sell anything, my parts are well above average hence the higher asking prices VS some of the other parts you see advertised.
if you don't like the asking price: go someplace else with your money and attitude don't even waste my time.
* I will also consider parting with my Procharger P1SC, 2 core assembly off of my green truck (minus the MADs prototype pieces) for $3400
Technical Article Contributor
Joined: Dec 2006
Posts: 1,584
Likes: 0
From: Sask. Canada
I plan to drop several thousand dollars on my truck in couple months...... I will be in touch....
