09+ SUPERCAB Custom Subwoofer enclosures - JL Audio subs - LMI seat lift
Thread Starter
|
Senior Member
Joined: Mar 2008
Posts: 248
Likes: 0
From: Vegas baby!!!
09+ SUPERCAB Custom Subwoofer enclosures - JL Audio subs - LMI seat lift
Fits: 2009-2012 F150 Supercab NOT Supercrew
Looking for BIG BASS? Looking for absolutely accurate reproduction in your F150? I am selling a custom built subwoofer enclosure for the F150 that will put all the off-the-shelf stuff from Supercrewsound and eBay etc to shame. This enclosure was done for the SEMA show last year and consists of (2) JL Audio 12w6v2's in a sealed, down fire enclosure that fits under the back seat. The key to this system is a LMI Welding seat lift kit that raises the seat 2.5" to get the needed lift for this amazing enclosure. This system was built for my F150 in October 2011 for the November SEMA show, and last February my truck was totaled in an accident. So there is less than 5months on this system. I have been planning on getting another F150 but I ended up getting a diesel instead. I am asking $500 and it comes ready to bolt in with the sub enclosure, (2) JL Audio 12w6v2's and the LMI seat lift kit.
Here's what it cost to build
JL 12w6v2: $499 each - $998/pair
LMI Seat Lift: $155
CUSTOM Enclosure: $300 (IF you can find someone to build it, try getting 2 12's that are almost 8" deep under that seat)
Total: $1,453
The enclosure is 1.0ft^3 of airspace per sub and is wrapped in tan cloth, that is easily changed to match your truck. I am 40yrs old and listen to mostly Rock and Jazz so these have very low playtime and use. These JL's are Dual 4ohm running series/parallel for a 4ohm load, and can be wired to run @ 1ohm if you want. These are ready to go but I will NOT be low-balled, and I am not hurting to sell these. If I don't get my price I will eventually find another project to throw these in. $500 is more than fair for this setup. You'd pay that for 1 Sub from and authorized store (that will actually give you a warranty and isn't selling refurbs) -
I also have a custom, front firing dual 10" ported enclosure (box only) that will give you the BIG BASS that no other underseat enclosure will. The enclosure is for (2) 10" subwoofers, and is PORTED and tuned to 32hz. The subs I used were Skar Audio VVX-10 and then Alpine Type R's and it pounded. The enclosure is also wrapped in Tan carpet, and can be easily changed to any color you choose. You will also need an LMI seat lift (not included) to get this under your seat. The price for the enclosure is $100 This enclosure will fit about 90% of subs out there. Call/text with any questions.
Alex 702.524.4438 - Jnavegas@gmail.com - I am in San Diego and go back to Las Vegas 2x month
Looking for BIG BASS? Looking for absolutely accurate reproduction in your F150? I am selling a custom built subwoofer enclosure for the F150 that will put all the off-the-shelf stuff from Supercrewsound and eBay etc to shame. This enclosure was done for the SEMA show last year and consists of (2) JL Audio 12w6v2's in a sealed, down fire enclosure that fits under the back seat. The key to this system is a LMI Welding seat lift kit that raises the seat 2.5" to get the needed lift for this amazing enclosure. This system was built for my F150 in October 2011 for the November SEMA show, and last February my truck was totaled in an accident. So there is less than 5months on this system. I have been planning on getting another F150 but I ended up getting a diesel instead. I am asking $500 and it comes ready to bolt in with the sub enclosure, (2) JL Audio 12w6v2's and the LMI seat lift kit.
Here's what it cost to build
JL 12w6v2: $499 each - $998/pair
LMI Seat Lift: $155
CUSTOM Enclosure: $300 (IF you can find someone to build it, try getting 2 12's that are almost 8" deep under that seat)
Total: $1,453
The enclosure is 1.0ft^3 of airspace per sub and is wrapped in tan cloth, that is easily changed to match your truck. I am 40yrs old and listen to mostly Rock and Jazz so these have very low playtime and use. These JL's are Dual 4ohm running series/parallel for a 4ohm load, and can be wired to run @ 1ohm if you want. These are ready to go but I will NOT be low-balled, and I am not hurting to sell these. If I don't get my price I will eventually find another project to throw these in. $500 is more than fair for this setup. You'd pay that for 1 Sub from and authorized store (that will actually give you a warranty and isn't selling refurbs) -
I also have a custom, front firing dual 10" ported enclosure (box only) that will give you the BIG BASS that no other underseat enclosure will. The enclosure is for (2) 10" subwoofers, and is PORTED and tuned to 32hz. The subs I used were Skar Audio VVX-10 and then Alpine Type R's and it pounded. The enclosure is also wrapped in Tan carpet, and can be easily changed to any color you choose. You will also need an LMI seat lift (not included) to get this under your seat. The price for the enclosure is $100 This enclosure will fit about 90% of subs out there. Call/text with any questions.
Alex 702.524.4438 - Jnavegas@gmail.com - I am in San Diego and go back to Las Vegas 2x month
Last edited by 7lug; Nov 12, 2012 at 01:09 AM.
