Saleen Updated Wheel Hub For Sale!!
Thread Starter
|
Senior Member
Joined: Aug 2008
Posts: 554
Likes: 0
From: New Orleans, LA
Saleen Updated Wheel Hub For Sale!!
I have FOUR 2007 Saleen S331 3-Valve & Supercharged with 15” Brake Upgrade
Wheel Hub Assembly Update
I will sell them separate a pair or all four together!
160 Shipped For Each, 300 Shipped For A Pair, 500 For All Four. You will receive the New Updated Hub and New Wheel Bearing Nut and Instructions with Specs!
2007 S331 3-Valve & Supercharged with 15” Brake Upgrade
Wheel Hub Assembly Update
INTRODUCTION:
Saleen, Inc. has decided that a defect which relates to motor vehicle safety exists in certain 2007 S331 Supercharged and S331 3V vehicles with the 15” brake upgrade option. These vehicles have a bearing held into each front hub by a C-clip, and some of the C-clips may not have been installed
properly. The potential failure modes of this issue are that the hub will come loose within the spindle and will force the rotor to contact the brake pad. Ultimately, depending on the driving condition (i.e. applied load), the bracket holding on the brake caliper could potentially fail, resulting in the rotating assembly (wheel, tire, hub, and rotor) separating from the vehicle. The Service Portion of this bulletin provides instruction on how to install this new wheel hub onto the vehicle.
IDENTIFICATION NUMBER:
This campaign is identified by 07V-188. This number must appear on all communications and documentation associated with this campaign.
NUMBER OF VEHICLES POTENTIALLY AFFECTED:
The number of vehicles potentially affected is 163.
Wayne
Wheel Hub Assembly Update
I will sell them separate a pair or all four together!
160 Shipped For Each, 300 Shipped For A Pair, 500 For All Four. You will receive the New Updated Hub and New Wheel Bearing Nut and Instructions with Specs!
2007 S331 3-Valve & Supercharged with 15” Brake Upgrade
Wheel Hub Assembly Update
INTRODUCTION:
Saleen, Inc. has decided that a defect which relates to motor vehicle safety exists in certain 2007 S331 Supercharged and S331 3V vehicles with the 15” brake upgrade option. These vehicles have a bearing held into each front hub by a C-clip, and some of the C-clips may not have been installed
properly. The potential failure modes of this issue are that the hub will come loose within the spindle and will force the rotor to contact the brake pad. Ultimately, depending on the driving condition (i.e. applied load), the bracket holding on the brake caliper could potentially fail, resulting in the rotating assembly (wheel, tire, hub, and rotor) separating from the vehicle. The Service Portion of this bulletin provides instruction on how to install this new wheel hub onto the vehicle.
IDENTIFICATION NUMBER:
This campaign is identified by 07V-188. This number must appear on all communications and documentation associated with this campaign.
NUMBER OF VEHICLES POTENTIALLY AFFECTED:
The number of vehicles potentially affected is 163.
Wayne
Junior Member
Joined: Nov 2011
Posts: 1
Likes: 0
Saleen Thunder Wheel Hub Assemblies
Do you still have the Thunder wheek hub assemblies? I own the Saleen Thunder prototype #2 white show truck and have a bad right wheel hub assembly. Can the assembly be repaired or do I need a new one?
Thanks,
Greg
248-766-2403
gpowrie@ilgi.com
Thanks,
Greg
248-766-2403
gpowrie@ilgi.com
