Eaton swap
Thread Starter
|
Senior Member
Joined: Apr 2004
Posts: 13,678
Likes: 82
From: missing Texas...
Eaton swap $2500
this is about to go on Ebay so I'll give another couple weeks to give the forum members a chance:
NO I won't part it out unless every single part is sold... yes I understand some of these parts are hard to find and that's why it's staying together
I have a stock Lightning, dual fuel pump, fuel hat (with twin GT-500 fuel pumps) I might consider tossing in depending on the deal made with the buyer
up for sale is a mostly (98%) complete Lightning swap setup:
- originally of off an '02 Lightning -
Ported Eaton
brand new boost bypass accuator
Ported Plenum (ported to clear Magnum Powers "Big O"
Stock Throttle Body
Ported Midplate
intercooler core (stock 10 row)
Lightning Alternator (with wiring pigtail)
Alternator Bracket
stock bosch Intercooler Pump, w/ bracket
stock Heat Exchanger with mounting bracket
SCT BA 2800 MAF
K&N FIPK w/ Amsoil oil free Air filter
Throttle Cable (brand new)
Throttle Cable Bracket (brand new)
Metco 2 piece lower pulley setup (4#) w/ belt (brand new hub and bolts w/ converter lockup tool)
stock caged crank pulley
Stock Idler bracket and tensioner (the one in the picture is a higher mileage unit rocking an Metco Auxillery Idler bracket) with a 90mm and a 100mm idler attached
passenger side PCV line
EGR valve
3/8 midplate spacer
'01-'04 Lightning Engine wiring harness
5 ft of 5/8 heater hose
IAT 2 sensor (the screw in one for the turkey pan)
you're probably wondering what this setup is missing:
factory bumper brackets for the heat exchanger (I have two that I fabbed for mounting it to the frame / bumper brackets)
fuel pump
intercooler tank
injectors
installation
tune
I'm asking $2500 plus shipping or you pick it up
kit is located near Nashville TN
the Eaton and Plenum will probably get painted bright silver...
I also have a black setup with polished ridges I'd give the buyer the option to choose which color
now on to the pics
- originally of off an '02 Lightning -
Ported Eaton
brand new boost bypass accuator
Ported Plenum (ported to clear Magnum Powers "Big O"
Stock Throttle Body
Ported Midplate
intercooler core (stock 10 row)
Lightning Alternator (with wiring pigtail)
Alternator Bracket
stock bosch Intercooler Pump, w/ bracket
stock Heat Exchanger with mounting bracket
SCT BA 2800 MAF
K&N FIPK w/ Amsoil oil free Air filter
Throttle Cable (brand new)
Throttle Cable Bracket (brand new)
Metco 2 piece lower pulley setup (4#) w/ belt (brand new hub and bolts w/ converter lockup tool)
stock caged crank pulley
Stock Idler bracket and tensioner (the one in the picture is a higher mileage unit rocking an Metco Auxillery Idler bracket) with a 90mm and a 100mm idler attached
passenger side PCV line
EGR valve
3/8 midplate spacer
'01-'04 Lightning Engine wiring harness
5 ft of 5/8 heater hose
IAT 2 sensor (the screw in one for the turkey pan)
you're probably wondering what this setup is missing:
factory bumper brackets for the heat exchanger (I have two that I fabbed for mounting it to the frame / bumper brackets)
fuel pump
intercooler tank
injectors
installation
tune
I'm asking $2500 plus shipping or you pick it up
kit is located near Nashville TN
the Eaton and Plenum will probably get painted bright silver...
I also have a black setup with polished ridges I'd give the buyer the option to choose which color
now on to the pics
I have a stock Lightning, dual fuel pump, fuel hat (with twin GT-500 fuel pumps) I might consider tossing in depending on the deal made with the buyer
Last edited by stoffer; May 31, 2013 at 08:17 PM.