OK, I know that this is an F150 forum, but I need some good advice.

Here is the story:

I am looking at a 91 Bronco to make into a hunting vehicle. It is an Eddie Bauer edition with the 351w. Motor is strong, tranny shifts nicely with no slipping. 163K miles.

Here is the bad. There is no hub cover on the passenger side front. You can see the spindle. There is quite a bit of surface rust but it seems to still be solid. What concerns should I have about this? It has automatic hubs. I am pretty new at 4wd vehicles so you will have to forgive my ignorance.

Thanks in advance for your help.

JJ