Fog Lamp adjustment
Thread Starter
|
Member
Joined: Jul 2006
Posts: 64
Likes: 0
Fog Lamp adjustment
Hey All,
I have a 99' F150 Lariet with the oval shaped fog lamps at the bottom. Some how my driver side lamp does not site flush up against the grey bumper part. I have removed the lamp assembly(just 3, 5/16ths screws) but I have no idea how to adjust that side back out to where it will be flush when i mount it back in. There are screws on the back of the lamp with white looking tabs on them, I just dont know how to adjust this. Anyone have any advice? It looks like the left side of the light needs to come back out a good 1/2 inch to be sitting close to flush.
Thanks
I have a 99' F150 Lariet with the oval shaped fog lamps at the bottom. Some how my driver side lamp does not site flush up against the grey bumper part. I have removed the lamp assembly(just 3, 5/16ths screws) but I have no idea how to adjust that side back out to where it will be flush when i mount it back in. There are screws on the back of the lamp with white looking tabs on them, I just dont know how to adjust this. Anyone have any advice? It looks like the left side of the light needs to come back out a good 1/2 inch to be sitting close to flush.
Thanks