Fender

Thread Tools
 
Search this Thread
 
Old May 7, 2001 | 04:28 PM
  #1  
97LARIAT18's Avatar
Thread Starter
|
Junior Member
Joined: May 2001
Posts: 4
Likes: 0
From: Mira Loma, CA
Red face Fender

Hey guys, yesterday me and a bunch of friends were off-roading in our trucks. Well i was following this lifted ranger and all i could see is dust so i followed the dust. i felt whoops under me so i slowed down to about 40 mph and next thing i knew i was going over a jump. i came down hard on the front suspension. I heard a big clunking noise and then it stopped as a came to a crawl on the side. i got out and everything looked fine and when i turned around everything seemed to be working. well when i turned around i saw a fender well wall laying in the dirt.i didnt think to check if it was mine. when i got to school today i got out checked my truck and sure enough it was my passenger side wall was gone. has this ever happened to anybody before? i have a stock suspension with b/f goodrich all terrains on. they have never rubbed before, but i have never been 5 feet off the ground either. Well i wanna know is there anything i should check to see is missing. The ride is fine and i checked all instruments and all other stuff and it seems to be fine. the only thing i did notice is(since i can see the engine now) is that there are clean threads by the back of the engine. i only had my lunch to check it out and i dont know what it is. thx in advance for any help of info.
 
Reply




All times are GMT -4. The time now is 01:15 AM.