I have an idea for a headlight and signal mod.
I recently bought my clear front signals and
being me,that wasn't good enough. I masked off
the whole outside surface of the headlight and
signal up to 1/2 to 1/4 inch from where the
edges break over and go into the grill shell.
I then scuffed and painted the outside edges
of both parts semi flat black. Man what a neat
effect, something like the new mustang. It also makes the front end more finished looking
,ie:the rough edges inside the h/l and sig.
don't show any more. You could also be creative and put designs on them, but mine look pretty good like they are now. have fun
with it either way/looks really cool.cya

------------------
98 F-150 4.6 Litre XLT
K/N gen.II fipk
Hypertech power mod. and power stat
Custom duals w/glasspacks
color matched Snuglid
Custom painted Clear headlight covers.
doin the monochromatic boogie on the front end.
on the way(headers,air dam,wheels and tires,etc...........................

 

How about some pictures...

 

Okay,I've got an image on the desktop,how do
get it in here??help me out ,I've never done
this before

 

1. Register at http://www.zing.com/ or http://www.photopoint.com

2. Upload your pictures into your area.

3. Copy the image location of your picture (do a right mouse click on the picture, go to properties, highlight the address, right click copy the address).

4. Post a reply and paste that address into your message with [img] before the address and [/img] after the address (without any spaces.)

Good luck.

[This message has been edited by BlueFlareside (edited 08-14-2000).]

 

odds are, your in violation of the transportion code. From what i'm reading, but i'll wait for the pics to be sure. Most importantly, make sure the correct colors and bulbs can be clearly seen.
I'll pull my TXTC and look it up if you're interested.

 

probably not, I only painted the outer 1/4"
to 1/2" of the front surface of the parts. I
doubt if any coppers would notice unless
they bent down and looked at it from about two feet away. actually the part covered by the paint doesn't transmit light
,it's only the part where the glue edges are. thanks for the concern,98

------------------
98 F-150 4.6 Litre XLT
K/N gen.II fipk
Custom duals w/glasspacks
color matched Snuglid
headlight covers.
doin the monochromatic boogie on the front end.
on the way(headers,air dam,wheels and tires,etc...........................

 

imghttp://www.driveway.com/web/fileProperties.jsp?file=37939399&dload=/download/vapp02-/img

 

 

 

GUYS...HELP ME OUT!!!!!

------------------
1999 F150 4x4 XLT BLACK ORP 4.6 5 SPEED 3.55
LUND HOOD SHEILD
K&N
FLOWMASTER SERIES 40 SINGLE OUTLET
CAPTAIN CHAIRS
PIONEER 6815's(for now)
SUPERCHIP
AIRBOX MOD
WAAG BRUSH GUARD
SPIRALMAX
KENWOOD 9015
SUPERCHIP STICKERS
MTX THUNDERFORM
KICKER 240 AMP

 

If you have it on xing, keep clicking on it until it opens on a seperate browser window at full size. Copy the address at the top.
You need to put img in brackets [] before the address and /img in brackets after the address. No spaces. Good luck

 

Put [img] in front and [/img] at the rear with no spaces. hurry and lets see them.

[This message has been edited by Jupiterak (edited 08-20-2000).]

 

I know how to post pics. If this is a valid file, it'll work:

 

Something is wrong with the url.

http://www.driveway.com/web/fileProp...wnload/vapp02-

He's obviously doing everything else correctly, otherwise we wouldn't see the following graphic on our screen! You know, the two squares with the red X in the center?



So, it's gotta be the url that's wrong.



[This message has been edited by Dennis (edited 08-21-2000).]

 

sorry guys,didn't mean to cause all this
trouble,I promise to get my scanner up
and running so I can get the pics up.
Of course,I've never done this before but
I'll give it a hell of a try. thanks for your patience. 98