Well I installed my new stereo last week and I finally have some pics. I went with a Pioneer 5200 for my HU. It's nothing super nice but it's good enough for me and my teenage budget. I will probably replace the dash kit with plexiglass so I can add aux switches, etc sometime but the one Crutchfield gave me went in well and looks pretty good.

<img>http://members.nbci.com/beamboter/MiscPics/HU.JPG</img>

For speakers I have a Polk Audio EX2550 component set. I mounted the tweeters in angled mounts on the door "sails". I have to mess with their angling but at the moment they sound good.

<img>http://members.nbci.com/beamboter/MiscPics/Tweet.JPG</img>

The woofers are in the front factory locations. They mounted easily with the adapters Cruthfield sent.

<img>http://members.nbci.com/beamboter/MiscPics/Woof.JPG</img>

In the mail is a 10" Kappa Perfect sub that will go in a box (I hope to make this weekend) behind the drivers seat. I was originally going to put it under the rear bench but I decided to sacrafice a little leg room for more enclosure flexibility. Considering I rarely have more than 4 people in my truck, this shouldn't be an issue. To drive my system I have a Jensen XA4150 75x4 amp. To provide enough oomph for the sub I'll bridge two of the outs. I may get a second amp in the future, but that may be overkill for know. Let me know what you think and happy trucking.

----Ok so the pics don't load. Just use the links until I can fix the problem----

------------------
'97 2wd F150 XLT, drk red/tan, 3 door, 5.4L, auto.

BFG A/T 265/75/16
Pioneer 5200 CD
Polk 5 1/4" component set.

Next up:
Rancho 4" lift and billet grill


[This message has been edited by brian h (edited 10-25-2000).]