I posted this in another post, but has any here tried B&M's module. From what I understand, it mounts to the trans. and has different settings. This can be used in addition to computer chips. Any thoughts?

Chris

------------------
96 F 150 SC 4x4, 5.0, All Black, Custom Cat Back 3 Chamber Flowmaster with dual outs and 3.5" tips, Superchip.

 

I used the B&M ShiftPlus on a 1997 Cougar with automatic...I am not sure if this is what you are asking but It basically wires in parallel with wires that control line pressure for transmission and then you select stock/firm/firmest.... If you are looking for one of these let me know because i would love to sell mine because I dont need it anymore.....
john

------------------
98 Nascar Truck Owner
Superchip,WMS Racing Air Tube, 3" Magnaflow catback exhaust, Hellwig Rear Antisway bar:Email- tohigh4you@aol.com

 

How did this work on your Couger? Did you like it? How much do you want for it?

Chris

------------------
96 F 150 SC 4x4, 5.0, All Black, Custom Cat Back 3 Chamber Flowmaster with dual outs and 3.5" tips, Superchip.

 

Chris, since you already have the superchip the B&M shift kit probably isn't worth the time and money. A while back someone who had both and tested them seperately on their truck seemed to like the results of shift changes with the chip better than the B&M. If you go back and check old messages there were a lot of comments on this subject.

------------------
98 Nascar Edition, superchip, K&N with airbox mod.

 

Hey Chris,
If you are interested in buying that part still I would take $20 for it plus shipping...but I did not see you already have Superchip....If you already have the chip you probably wouldnt need the B&M ShiftPlus....but like I said let me know!!!
john

------------------
98 Nascar Truck Owner
Superchip,WMS Racing Air Tube, 3" Magnaflow catback exhaust, Hellwig Rear Antisway bar:Email- tohigh4you@aol.com