I bought a Filter kit and Smooth tube kit from them and I have to say , these are some of the most helpful people I have ever dealt with... The smooth tubing and filer kit have been on for awile, and there is a gasket between the filter and the mass air meter. I called to see if i needed to reuse it, they take time to talk to you .. You would think I spent thousands of dollars with them.This is only 1 of the 4 or so calls i made.... Thanks Tim And Paul..............

PEaCE........................

 

They are a great group of dudes to deal with... Now if they could get something rolling on the West Coast.... Hint

 

yes, they are the best people to work with. When I ordered my intake from them, it was on back order for a while and I knew it, but they would call me regularly and keep me updated. Much appreciated.

Speaking of the intake tube, I somehow managed to loose the smaller rubber gasket for the small vaccum line that connects to the intake when I pulled my mods off. Anyone know where I can get another one?

 

Blown 93
We appreciate your comments, they do not go unnoticed. Tim and I along with our staff realize that our continued success is built one customer at a time and that each one is as important as the next no matter if they bought a 14.00 filter or a complete motor, for that matter even if it was just a phone call for advice.

Brap
Need your name and I'll send the gasket to you ASAP no charge.
Paul

 

Paul,

Its Ryan Gilfether. I can call if you need my address or anything.

 

Ryan
I packed all 3 grommets just in case
ups tracking # 1ZR461V21240753750
Paul

 

Wow! I really need to visit these guys with some $$. I'm about 30min away.

 

rem =

 

Paul,

Once again, thank you! For this reason alone, I will be sure to spend all my mod money at Razor's Edge Once you guys get those cams for sale after testing, be assured I will be waiting in line to buy one.

 

i think im going to have to move before i get my L.. or will you guys please ban me from your property..

i can see it now, i will be spending wayyyyyyy too much money at your shop

 

so is the smooth intake tube just bolt on or do you have to file down anything?

 

Paul and Tim, when will your website be ready?

 

cyntaxx....

you do need to file the plastic lip off of the mass air unit......takes about five minutes. Other than that, it just slips right on.

Brasil....

Web site, with full online store, should be up by the end of the week.

 

Sweet man!

-Mike

 

Looking forward to it!