Sub 13-second w/o a chip?
Thread Starter
|
Senior Member
Joined: Jun 1999
Posts: 1,487
Likes: 0
From: Oak Point, Texas
Originally posted by Blown93
sixpipes
Good Run dude.. Nice time.. What mods do you have to the truck...
PEaCE..................
sixpipes
Good Run dude.. Nice time.. What mods do you have to the truck...
PEaCE..................
C=Chip
F=Filter
L=Lower Pulley
U=Upper Pulley
T=Throttle Body
W=Water Pump/Electric Fan
P=Power Cooler
D=Drag Tire
S=Suspension/Traction Device
E=Muffler/Catback Exhaust
A=Headers
M=MAF
K=Shift Kit
V=Conveter
G=Gears
I=Upper Intake Work
H=Heads/Cams Work
B=Bottom End Work
O=Race Fuel
R=Weight Reduction
N=Nitrous Oxide
Z=Aftermarket Supercharger
Also ran a 12.38 w/chip yesterday.
Last edited by sixpipes; Dec 8, 2002 at 06:56 PM.
.
Senior Member
Joined: Dec 2001
Posts: 2,527
Likes: 0
From: Here
Hey you also had a nice run with the chip... why did you try it with out the chip... with a lower and upper it sounds kind of dangerous to me..
PEaCE.................
PEaCE.................
Trending Topics
Senior Member
Joined: Oct 2002
Posts: 1,620
Likes: 1
From: Central Joisey
Originally posted by sixpipes
FLUTWDSEAMKGOR using the following legend................
C=Chip
F=Filter
L=Lower Pulley
U=Upper Pulley
T=Throttle Body
W=Water Pump/Electric Fan
P=Power Cooler
D=Drag Tire
S=Suspension/Traction Device
E=Muffler/Catback Exhaust
A=Headers
M=MAF
K=Shift Kit
V=Conveter
G=Gears
I=Upper Intake Work
H=Heads/Cams Work
B=Bottom End Work
O=Race Fuel
R=Weight Reduction
N=Nitrous Oxide
Z=Aftermarket Supercharger
Also ran a 12.38 w/chip yesterday.
FLUTWDSEAMKGOR using the following legend................
C=Chip
F=Filter
L=Lower Pulley
U=Upper Pulley
T=Throttle Body
W=Water Pump/Electric Fan
P=Power Cooler
D=Drag Tire
S=Suspension/Traction Device
E=Muffler/Catback Exhaust
A=Headers
M=MAF
K=Shift Kit
V=Conveter
G=Gears
I=Upper Intake Work
H=Heads/Cams Work
B=Bottom End Work
O=Race Fuel
R=Weight Reduction
N=Nitrous Oxide
Z=Aftermarket Supercharger
Also ran a 12.38 w/chip yesterday.
Senior Member
Joined: Mar 2000
Posts: 6,798
Likes: 0
From: TEXAS
Originally posted by ricekicker
Yo...your fuel ratios are probably F'ed up
I would get on a dyno ASAP and check that out if you don't have a gauge. Eeek!
Yo...your fuel ratios are probably F'ed up
I would get on a dyno ASAP and check that out if you don't have a gauge. Eeek!
Sixpipes truck has been an amazing thing to watch for some time..
He has dynoed the truck with and without chips...
It was a great run... He did use slicks but the traction at the track was soo bad they were required...
Doug
Senior Member
Joined: Jun 2002
Posts: 673
Likes: 0
From: Plano, Texas
Originally posted by yysenhimer
These are all of your mods? Or these are what you have planned? That seems like a lot of mods to be running those times, especially with nitrous
These are all of your mods? Or these are what you have planned? That seems like a lot of mods to be running those times, especially with nitrous
I think you may be looking at the legend. He has the mods that he listed below his post. Look at the legend to see what each letter represents.
I didn't see him using juice. I don't think he has NOZ.
Rocks
Senior Member
Joined: Aug 2001
Posts: 3,519
Likes: 0
From: Greater Boston
It has been done
Ed, (BostonL), did it this fall. 2000 L. Ran 12.96 i believe. His mods were a 2lb pulley, singleblade throttle body, and K&N filter. Was done on stock F1's at Englishtown. He's been trying this since he got his truck and ran a ton of 13.0's , but finally did it. There is a video on here somewhere. He's looking to trade it in now for a cobra
Just kidding Ed, they are some sweet.
Just kidding Ed, they are some sweet.