Is this bling or bling-bling or ....
Thread Starter
|
Senior Member
Joined: Jul 2001
Posts: 1,122
Likes: 0
From: Illinois
Hey Rob, Nice blower, I take it you are on the wating list for the PowerPipe
Mike sent me these so I could cut them down to my liking. I have all the necessary parts ( maf base, vacuum line ports, etc. ) that will get welded on later before the final polishing.
Senior Member
Joined: Jan 2001
Posts: 1,467
Likes: 0
From: La Habra, CA
Rob, are those stainless or aluminum? I built my ugly one from aluminum and welded AN weld bungs onto the bottom. I used braid stainless for the PCV lines.
1/16" aluminum is a B*%ch to weld on.
1/16" aluminum is a B*%ch to weld on.
Senior Member
Joined: Aug 1999
Posts: 1,247
Likes: 0
I hope that Rob won't mind me adding these two photos. This is a supercharger that was done for a 1999/2000 and I offered these items to Rob too. Ported and polished on the inside and you can see the outside. CF valve covers too.
Last one.
Some additional information. The manifold has been black ceramic coated. The field surounding the SVT letters will be powdercoated black and then the letters will be polished too.
Last one.
Some additional information. The manifold has been black ceramic coated. The field surounding the SVT letters will be powdercoated black and then the letters will be polished too.
Last edited by BABolt; Dec 6, 2002 at 05:08 PM.
