Lightning

A/F readings

Thread Tools
 
Search this Thread
 
Old Nov 1, 2002 | 07:07 AM
  #1  
SLVRLTNG's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2001
Posts: 2,042
Likes: 0
From: Redmond, Wa
A/F readings

which cylinders in the exhaust manifold are best to locate the A/F reading bungs, or does it make a difference? Thanks, JR
 
Reply
Old Nov 1, 2002 | 10:01 AM
  #2  
LIGHTNINROD's Avatar
Senior Member
Joined: Apr 2001
Posts: 5,939
Likes: 0
From: Warner Robins, Ga, CSA
I d/k but TTT...................

Dan
 
Reply
Old Nov 1, 2002 | 03:21 PM
  #3  
SLVRLTNG's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2001
Posts: 2,042
Likes: 0
From: Redmond, Wa
Well,
I just had it done and they only welded one bung on the exhaust pipe as far in front of the cat as they could reach...
 

Last edited by SLVRLTNG; Nov 1, 2002 at 05:12 PM.
Reply
Old Nov 1, 2002 | 03:35 PM
  #4  
soap's Avatar
Senior Member
Joined: Sep 2001
Posts: 4,342
Likes: 0
From: Motor City
I think Sal said #5 cylinder was the best one to monitor........maybe he said it was usually the leanest, which IMO is still a good reason to monitor it.

--Joe
 
Reply
Old Nov 1, 2002 | 03:41 PM
  #5  
BADBOLT2's Avatar
Senior Member
Joined: Feb 2002
Posts: 417
Likes: 0
From: Chandler,Az.
What Soap said,Sal told me the same.I had my EGT probe welded in on #5 as close as possible to the cylinder.
 
Reply




All times are GMT -4. The time now is 04:33 AM.