I am almost done with polishing a PSP Airbox and wanted to see what you guys think it would look like if I had the three polished sides covered with clear-coat power coating and the inside and bottom done with gloss black power coating.


Initial Buff


After alot of Buffing


Also has anyone seen a Supercharger that was polished then shot with Clear-coat Powdercoating? I have been told there is only a slight orange peel look to it. Thanks

 

I have seen some powdercoated clearcoating leave a "yellowish" finish.

 

I could also leave the 3 sides of the airbox polished and just do the inside and bottom gloss black. I do have some clear-coat from Eastwood that is used to cover valve covers (good to 350°) and says non-yellowing. I'm thinking about giving that a shot also.

 

Steve
Its looking great cant wait for finished pics. I just sent you an e-mail through the board not sure if you will get it since i know you switched e-mails if you dont get it shoot me an e-mail @ BadAzz516@aol.com
Thanks

 

Steve,
It's gonna look great when it's done.

I also have Eastwood's powdercoating system and was talking to their tech guy last weekend about clearcoats. If you apply the clearcoat over their chrome argent, it gives a dull finish. They are not sure why, but are working on it. I am not sure what kind of results you'll get over straight polished metal though.
You can call them with any questions. I find them very helpful.

 

You got mail BaddAzz (Vin)

 

http://www.eastwoodco.com/aspfiles/i...1.x=38&I1.y=62

This is the Eastwood Clear Metal Aerosol I am talking about.

 

Steve
Thanks you got mail back HEHE .