Nitrous and Manleys...
Thread Starter
|
Brainless and Banned
Joined: Jul 2002
Posts: 76
Likes: 0
From: So. FL
Nitrous and Manleys...
I know this sounds like it has been asked a million times, but i havent found anything on how much juice can i run safely with the manley rods and a 4 or 6lb lower?
Thanks for the input....
Thanks for the input....
Last edited by boostedtruck; Sep 27, 2002 at 11:52 AM.
Senior Member
Joined: Oct 2000
Posts: 846
Likes: 0
From: Hammonton, NJ 08037
I have ran a 8# pulley and 100shot so far.
Make sure you upgrade your fuel pumps as I have ran lean because the pumps could not keep up witht e demand. Now that the head gaskets have been replaced I will be running the 8# pulley with a 150 shot (after some testing with the 100shot) After that who knows, I may go to the 10# pulley or a larger shot. But I think any larger shot I think the nitrous will need it's own fuel cell and pump (also a progressive controller for traction)
Make sure you upgrade your fuel pumps as I have ran lean because the pumps could not keep up witht e demand. Now that the head gaskets have been replaced I will be running the 8# pulley with a 150 shot (after some testing with the 100shot) After that who knows, I may go to the 10# pulley or a larger shot. But I think any larger shot I think the nitrous will need it's own fuel cell and pump (also a progressive controller for traction)