How do you guys get your factory tonneau end to lay flat?
Senior Member
Joined: Nov 2001
Posts: 3,652
Likes: 0
From: Charlotte, North Carolina
device manager,
I've never had that problem with mine but I've read that you can clip the stictches in the corners to help them lay flat. Before you do it, wait on some more responses. Don't want to steer you wrong.
Tim
I've never had that problem with mine but I've read that you can clip the stictches in the corners to help them lay flat. Before you do it, wait on some more responses. Don't want to steer you wrong.
Tim
Senior Member
Joined: Apr 2000
Posts: 12,632
Likes: 1
From: Stinkin Joisey
If yours is flipping, it's too late
BUT if not, then you CAREFULLY take a single edge razor (Woops bad word) blade and cut out the excessive material that is bunched up beyond the stitching. In other words, cut off the material beyond the thread. DO NOT CUT THE STITCHING
BUT if not, then you CAREFULLY take a single edge razor (Woops bad word) blade and cut out the excessive material that is bunched up beyond the stitching. In other words, cut off the material beyond the thread. DO NOT CUT THE STITCHING
