OT / '03 Cobra vs. modded Z
Thread Starter
|
Senior Member
Joined: Jul 1999
Posts: 636
Likes: 0
From: OKC, OK
OT / '03 Cobra vs. modded Z
Last edited by Chipper; Aug 26, 2002 at 04:24 PM.
Senior Member
Joined: Mar 2002
Posts: 2,464
Likes: 0
From: Davie, FL
Senior Member
Joined: Mar 2002
Posts: 2,464
Likes: 0
From: Davie, FL
Trending Topics
Senior Member
Joined: Apr 2001
Posts: 946
Likes: 0
From: Over yonder somewhere
Guys, try not be so blind that you can't/won't think a Cobra can lose to an LS1 with a power adder. If the LS1's spraying a 100 shot he's putting down WELL OVER 400rwhp. That's more than enough to pull a stock Cobra.
Now, chip-filter-pulley-exhaust that Cobra...
Now, chip-filter-pulley-exhaust that Cobra...
Senior Member
Joined: Sep 2000
Posts: 851
Likes: 0
From: Indiana
First of all if that cobra was actually racing it was bone stock,now if you put exhaust,filter and 2.80 pulley on the cobra that car is toast.My friend has this setup and is trapping at 122mph in hot humid air and has already taken out 2 GTS vipers from a roll to 140 and took out a highly modded LS1 with 4.10 gears and longtubes with a 175shot of NOS and handed this guy his *** from a roll.These new Cobras with the right mods are a beast once the car is moving!
Senior Member
Joined: Oct 1999
Posts: 4,565
Likes: 0
From: NJ
Originally posted by jeff2001silver
I don't think the Cobra was racing.
I don't think the Cobra was racing.
Unless that Z28 was highly modded and the cobra guy had no clue how to drive, the Z28 would have needed a little more then 400hp to walk the cobra that bad. I mean he left him like his was a sunday driver.
Also if you look at the Cobra you don't see any jerks from the blower kicking in or downshifting.
