Works M140 Whipple Twin Screw spy photos!
Senior Member
Joined: Jul 2000
Posts: 274
Likes: 0
From: San Jose, CA
Finally!
Wow! So this blower should be capable of more HP since it is a 140 as opposed to the Kennebell which is only a 122, right?
JdgsDdahM____SryhUrewChdsKhfueS
JdgsDdahM____SryhUrewChdsKhfueS
Last edited by Incon306; Aug 11, 2002 at 04:15 PM.
Senior Member
Joined: Aug 1999
Posts: 5,438
Likes: 1
From: Palm Coast, FL
Re: Finally!
Originally posted by Incon306
Wow! So this blower should be capable of more HP since it is a 140 as opposed to the Kennebell which is only a 122, right?
Wow! So this blower should be capable of more HP since it is a 140 as opposed to the Kennebell which is only a 122, right?
The Works 140 kits uses a rear inlet 2.3L Whipple Twin Screw. The Kenne Bell kit uses a top inlet 2.0L Autorotor Twin Screw. The 140 should make a ton more power with it's larger displacement and more efficient rear inlet design, as proven by Calightin's truck making 20 psi with only a 2 lb lower.
The 201 kit uses a 3.3L Whipple. The 201 kit is in the works (no pun intended) but is most likely going to be quite a ways off from production. The 201 is a massive blower, and will be intended for race only type trucks. With a STOCK lower pulley, we are calcualating the 201 to produce 29 psi. There may be some drivability issues using the 201 on the street, just speculation at this point, but we'll know for sure when we test it in the future. The 201 will require a completely new intake casting, as well as a custom intercooler manifold. It will not fit the stock setup. If you look at the 201 picture closely, you can see the bottom of the 201 is actually wider on the flange area than the 140 adapter plate it's sitting on
.
Rest In Peace
Joined: Feb 2001
Posts: 2,782
Likes: 0
From: Right Flucking Here Ni66a
Originally posted by Calightnin
Anyone have a suggestion as to how to video tape like a full blast? Tape the cam to the hood ?
By the way I hear the M201 supercharger from Works is being developed. It is huge!
This is a picture of the M140 next to the M201 sent to me by Sal and Works Power. I'm scared of that!
99L
Anyone have a suggestion as to how to video tape like a full blast? Tape the cam to the hood ?
By the way I hear the M201 supercharger from Works is being developed. It is huge!
This is a picture of the M140 next to the M201 sent to me by Sal and Works Power. I'm scared of that!
99L
Senior Member
Joined: Oct 1999
Posts: 4,565
Likes: 0
From: NJ
Re: Re: Finally!
Originally posted by LightningTuner
...The 201 kit uses a 3.3L Whipple. ...
...The 201 kit uses a 3.3L Whipple. ...
Suspended For Rules Violations
Joined: Aug 2000
Posts: 1,813
Likes: 0
From: So. Cal
Originally posted by Calightnin
Anyone have a suggestion as to how to video tape like a full blast? Tape the cam to the hood ?
99L
Anyone have a suggestion as to how to video tape like a full blast? Tape the cam to the hood ?
99L
Member
Joined: Aug 2002
Posts: 36
Likes: 0
From: fort wayne IN
How do I get more information on these blowers. I am interested in purchasing one. If some one could give me an idea of prices, max boost, efficency. This would be greatly appericated, and thank you.
Senior Member
Joined: Aug 2001
Posts: 1,516
Likes: 0
I dont know about you guys, but I love the sound of my blower and would do anything to make it louder at WOT
~Toast
lets hope we have those options to make these works blowers scream like they should as well.
~Toast
lets hope we have those options to make these works blowers scream like they should as well.