How do I install the billet window switches? They do not seem to fit.

 

they just pop on, push hard

 

Did mine about a month ago...There are 2 screws...one behind the handle, and one behind the plastic trim that goes up the side of the window. Take those off and the panel will LIFT out. The switches will then pop off....pop on the new ones....then what I had to do was shave a little bit of the plastic around the hole where it will pop up. I found that it would not pop up smoothly. I simply used a knife and you can't even notice it. Hope this helps. It took me about 20 minutes to do the whole job. Good luck.