Stull Billet Grille
I just installed mine a couple of weeks ago.Turned out pretty nice.
Install was pretty straight forward.The instructions tell you to grind off all the original mounting tabs in the upper grill,but it's not necessary.only the two in the bottom outside corners have to go.I'm havin some issues w/my computer,but i'll try and post some pics when I can.
Hope this helps!-Dave.
Install was pretty straight forward.The instructions tell you to grind off all the original mounting tabs in the upper grill,but it's not necessary.only the two in the bottom outside corners have to go.I'm havin some issues w/my computer,but i'll try and post some pics when I can.
Hope this helps!-Dave.
I have the stull on the top and the trenz on the lower as stull had no lower for an L over 2 years ago when i did mine.
There is not a lot of difference in the two brands,other than the lower,no matter what the brand,seems to get hogged up and has some of the black paint in between the grills flaking off after around 10-12k.
There is not a lot of difference in the two brands,other than the lower,no matter what the brand,seems to get hogged up and has some of the black paint in between the grills flaking off after around 10-12k.
Originally posted by IOPNER
Thanks for the feedback. Any pics would help out alot.
Thanks for the feedback. Any pics would help out alot.
http://www.nloc.net/forum/showthread...threadid=22768
--Joe
Hello IOPNER :
I have the stull grilles on mine also and just as Badbolt2 said for installing although I did remove all the tabs.
Click on my F150online gallery link for some pics.
F150online gallery

Have a great day eh ! ......... Dave
I have the stull grilles on mine also and just as Badbolt2 said for installing although I did remove all the tabs.
Click on my F150online gallery link for some pics.
F150online gallery

Have a great day eh ! ......... Dave
Trending Topics
Originally posted by soap
Where are you at in MI?? Are you signed up??
http://www.nloc.net/forum/showthread...threadid=22768
--Joe
Where are you at in MI?? Are you signed up??
http://www.nloc.net/forum/showthread...threadid=22768
--Joe
I am in Macomb. I didn't know about the event. I will plan on attending though. I am going to the Dyno Day's this weekend at Livonia Motorsports. I haven't done any mods yet but I want to get my baseline first.
Tom
Originally posted by Zman
where did you order them for IOPENR? I'm interested in getting that same grill
Z
where did you order them for IOPENR? I'm interested in getting that same grill
Z


