Where to get billet fuel doors?
Senior Member
Joined: Apr 2000
Posts: 267
Likes: 0
From: Mont belvieu, TX, USA
Ford brushed aluminum fuel door
Technical Article Contributor
Joined: Jun 2002
Posts: 10,511
Likes: 10
From: Under the flightpath of old ORD 22R
Re: Ford brushed aluminum fuel door
Originally posted by Lightninforce
In stock. Can ship one tomorrow.
Mark/LFP
www.lightningforceperformance.com
In stock. Can ship one tomorrow.
Mark/LFP
www.lightningforceperformance.com
Maybe you could answer a question for me.
I thought that i read that this could not be installed in a SCrew ( I know it is a L forum..).
Is this true ?
If not, might you know if your supplier is going to make one for the Screw ( again if I do not have my info wrong on this ).
Thanks
Senior Member
Joined: Aug 2001
Posts: 1,208
Likes: 0
From: Clinton Twp, Michigan
Senior Member
Joined: Aug 2001
Posts: 1,208
Likes: 0
From: Clinton Twp, Michigan
well i do not have one, but i saw some one on www.nloc.net that had one, but i dont remember who. Try doing a search there.
I supose that it does fit cause I saw pictures of it on his truck, but i dunno for sure?
--Justin
I supose that it does fit cause I saw pictures of it on his truck, but i dunno for sure?
--Justin
Posting Rights Suspended
Joined: Jan 2001
Posts: 2,239
Likes: 0
From: I drive way too fast to worry about cholesterol.
Trending Topics
Senior Member
Joined: Jul 2001
Posts: 123
Likes: 0
From: Limestone TN
ProCarParts hardware
I have The ProCarParts one, (sorry Tampa, bought before your current ordeal
) and the hardware that came with it sucks. If you get it be prepared to purchase 6 new bolts to go with it. I had to go to the Harley shop to find them locally. If I were to do it over again, I would purchase from one of our vendors. No doubt the quality would probably be better.
) and the hardware that came with it sucks. If you get it be prepared to purchase 6 new bolts to go with it. I had to go to the Harley shop to find them locally. If I were to do it over again, I would purchase from one of our vendors. No doubt the quality would probably be better.
Senior Member
Joined: Oct 2001
Posts: 978
Likes: 0
From: Windsor, Ontario, Canada
Can also get one from a Ford dealership.
The Mustang Bullitt fuel door. Part no. is 1R3Z 63405A26 AA .
Performance Mods
JDM flip chip . JDM cold air induction . JDM 4 lb. interchangeable lower pulley .
JDM boost bypass . Oil breather cap . Ngk-Tr6 Plugs@.042 gap .
Inline valve body . Deep sump pan and filter .
Appearance Mods
Stull billet grille . Bullitt gas cap . Astrocap lid . Ground Force 2/1 lowering kit .
20% window tint . Herbs washers . Lightning floor mats .
Lightning website
F150online gallery
Have a great day eh ! .................................................. .......... Dave
The Mustang Bullitt fuel door. Part no. is 1R3Z 63405A26 AA .
Performance Mods
JDM flip chip . JDM cold air induction . JDM 4 lb. interchangeable lower pulley .
JDM boost bypass . Oil breather cap . Ngk-Tr6 Plugs@.042 gap .
Inline valve body . Deep sump pan and filter .
Appearance Mods
Stull billet grille . Bullitt gas cap . Astrocap lid . Ground Force 2/1 lowering kit .
20% window tint . Herbs washers . Lightning floor mats .
Lightning website
F150online gallery
Have a great day eh ! .................................................. .......... Dave
Senior Member
Joined: Jan 2002
Posts: 241
Likes: 0
From: Anchorage, Alaska
Got mine off of ebay. I got lucky when I was looking because a guy was selling a whole lot of them. I bought it and sent it off to be chromed back in April and still have not gotten it back from the chromer yet. That is a whole different story though. 
Senior Member
Joined: Jan 2000
Posts: 1,321
Likes: 1
From: "Enjoy every sandwich" - Warren Zevon
Avoid the one from Stylin' Concepts...
The one I got fit like a saddle on a sow, and to top it off, it had a magnetic catch on it that allowed the door to pop open if you even looked crosswise at it.
To make matters worse, the bozos at Stylin' Concepts tried to impose a $19 restocking fee when I returned it. They offered to waive the return fee if I applied to another order. What does that tell you???? Sorry S. C., that won't fly and you just lost a customer.
To make matters worse, the bozos at Stylin' Concepts tried to impose a $19 restocking fee when I returned it. They offered to waive the return fee if I applied to another order. What does that tell you???? Sorry S. C., that won't fly and you just lost a customer.