18lbs of Boost on Stock Blower
Senior Member
Joined: Jun 2001
Posts: 2,516
Likes: 0
From: Bay Area, California
well maybe someone will come up with braided lines like the main lines for fuel the coming from the bottle. this system is really cool, from what i read. hopefully i will have one soon. but like you said, i dont know about those plastic lines
Member
Joined: Apr 2002
Posts: 85
Likes: 0
From: Texas
ya, the plastic lines will crack, we have used this type of line on bikes & jet-ski's.
I have all of the parts comming to do it in braided line, I figured that I can use the plastic for this weekend. The -3 stuff wont get here until next Wed. Then I get to have a line making party!!
Sorry Don, didnt mean to get off the subject of big boost. I just thought I would throw out a way to get that sweet motor of yours to push your truck beyond that 12 sec brick wall you keep running into!!
jb
I have all of the parts comming to do it in braided line, I figured that I can use the plastic for this weekend. The -3 stuff wont get here until next Wed. Then I get to have a line making party!!
Sorry Don, didnt mean to get off the subject of big boost. I just thought I would throw out a way to get that sweet motor of yours to push your truck beyond that 12 sec brick wall you keep running into!!
jb
Last edited by avdawg; Jul 12, 2002 at 05:21 AM.
Senior Member
Joined: Oct 1999
Posts: 2,497
Likes: 0
From: EVERYWHERE
Re: Re: 18lbs of Boost on Stock Blower
Originally posted by BadAzz516
Don
What was the speedo reading hehe. That always amazes me when guys post pics or vids of the speedo pegged at 140 
. How the hell can you guys drive and do that at the same time. I would never imagine being able to do that around here.
Don
What was the speedo reading hehe
. That always amazes me when guys post pics or vids of the speedo pegged at 140 . How the hell can you guys drive and do that at the same time. I would never imagine being able to do that around here.
Rest In Peace
Joined: Feb 2001
Posts: 2,782
Likes: 0
From: Right Flucking Here Ni66a
Re: Re: Re: 18lbs of Boost on Stock Blower
Originally posted by Spiro99SVT
LOL...how many 140+ pics have you actually seen?? Not many at all.
LOL...how many 140+ pics have you actually seen?? Not many at all.
Whats up havent seen you around in a while. Hows the stang? Well i at least remeber your 140 mph pic, and at least a few others i know i have seen and Bill just recently posted a video with a 140 mph blast. So they are out there hehe
. Nice to hear from you again.
Senior Member
Joined: Oct 2000
Posts: 846
Likes: 0
From: Hammonton, NJ 08037
With a good launch you should be in the 11s! I am working on lots of boost myself. Will be testing an 8# lower pulley and if I don't get kicked off the track a 75 shot on top of that.
Below is a pic of the JLP pulleys (from left to right) a 4#,6# and my new 8#.
I am working on lots of boost myself. Will be testing an 8# lower pulley and if I don't get kicked off the track a 75 shot on top of that. Below is a pic of the JLP pulleys (from left to right) a 4#,6# and my new 8#.
Senior Member
Joined: Dec 2000
Posts: 2,365
Likes: 0
From: Elkton, MD
Just get a 10lb lower from JL. I have the 10lb lower and 1.5 upper and I ran a 12.0 in very high heat, track temp was over 100. I was running a street chip due to some pinging because I had cheap race gas.
I have the 10lb lower and 1.5 upper and I ran a 12.0 in very high heat, track temp was over 100. I was running a street chip due to some pinging because I had cheap race gas.
