I just installed the silver bullit cat back. Sweet sound.
I have heard of people blowing off there bassani anyone ever blow off there silver bullit? I tightened the clamps with an electric impact (no air at house). I dont really want to weld in case I want to back to stock quickly.

Thanks Alex

 

Launch the truck as hard as you can. Thats how I got my Bassani to shoot off. If it doesn't come off your probably all set. The hangers will stop it from slamming into the ground and being run over by the back tire, if it does come off.

 

A good(craftsman) electric 1/2 impact is good for about 80 ft lbs on the average.You should be O.K..You might want to snug it off a little and recheck next week.
I have not had any problems and heard of any either.

VINNIE

 

mine blew off three times after that i decided to weld that bad boy always happened when dropping to second gear on WOT
made me mad now all is good

 

3 effin times.......holy shizznit.

--Joe

 

Sounds like too much backpressure lol j/k Anyone have a pic. of one installed on their L? I'm interested in the angle of the pipes as they go down to the tips...