I was wondering if you could just unhook the factory boost gauge and hook it up to a aftermarket pod gauge. and if they make electrical boost gauges????

 

actually you can just splice into the vacuum line for the factory gage.....the line is under the dash near the steering wheel....I haven't gotten gages yet so I'm not sure exactly where it is..... Do a search on gages you'll find it...JR

 

You can unhook it or splice in!!!


Chikin@Charter.net
---------------------
Black '01
Born on 5-3-01
#3603 of 6381
424HP/528ft.lbs @ Normal Temp. w/o N2O
JL Logocaps w/Keychain
JL 3# Lower Pulley
Sean Hyland 2# Upper Pulley
JDM Cold Air
JDM Boost Bypass
JDM/Accufab Throttle Body
JDM Longtubes w/ Silver-Bullet cat-back
JDM Cobra R pump
JDM Eletric Fan
JDM 2” Drop Shackles
PSP 4-Way Autologic Chip ( Tow, Street,Track, N20 )
PSP FactoryTech Valvebody
PSP Deep Tranny Pan
PSP DriveShaftLoop
PSP Truck-Traks
PSP Nitrous Plate
Nitrous Express 50-150 Kit ( Can’t decide which jets to use )
NGK / TR6’s ( .040gap )
Hoosier DOT’s 28 x 10 x 16
NEXT:
Built Shortblock w/Ported Heads
Monster Box Tranny
JDM 166 Blower and 100mm MAF
AND DEFINITELY SOME BIGGER SLICKS

 

Autozone has a 7/64" female rubber tee that works perfect for splicing into the vacuum/boost line. Here is a detailed step by step posting of the gauge install:

https://www.f150online.com/forums/sh...all+Directions

 

4D THNDR,
excellent write-up...I just bookmarked it for later use..........JR