Lightning

so cal L's plug ?

Thread Tools
 
Search this Thread
 
Old May 11, 2002 | 08:15 PM
  #1  
Z28KLR's Avatar
Thread Starter
|
Senior Member
Joined: Feb 2001
Posts: 194
Likes: 0
From: San Pedro, Ca, USA
so cal L's plug ?

Which plugs have been working best w/ the 4 lb. pulley? also what are you gaping them at? -thanks
 

Last edited by Z28KLR; May 11, 2002 at 08:18 PM.
Reply
Old May 11, 2002 | 08:17 PM
  #2  
Don's Bolt's Avatar
Senior Member
Joined: Nov 2001
Posts: 6,166
Likes: 0
From: Burlington, Ma
I am using the NGK TR6
 
Reply
Old May 11, 2002 | 08:23 PM
  #3  
StruckBy99's Avatar
Senior Member
Joined: Apr 2001
Posts: 777
Likes: 0
From: IN
I am using the Denso IT22 @ .040

Jason
 
Reply
Old May 11, 2002 | 08:59 PM
  #4  
BLackBoLT99's Avatar
Suspended For Rules Violations
Joined: Aug 2000
Posts: 1,813
Likes: 0
From: So. Cal
I had the stock plugs, and melted those.

Then I had the Denso IT-20's and melted those.

Now I am stock. It doesn't matter if you spend the $20 for the NGK's, or the $100 for the Denso's, it's ALL in the chips tunning. PERIOD.
 
Reply
Old May 12, 2002 | 06:29 PM
  #5  
Jay Lincoln's Avatar
Senior Member
Joined: Jan 2001
Posts: 1,467
Likes: 0
From: La Habra, CA
Chad, I went all the way to NGK BR7EF's to cure a detonation problem. I only have a 2# pulley, but a fairly lean tuneup. So far, I have almost 10K miles on them, and only an occasional misfire.
 
Reply




All times are GMT -4. The time now is 09:39 AM.